Krups XP2010, XP2000 manual Fill the water tank 1 2 3 and turn on the machine

For best results, we recommend that you pre-heat the accessories (filter holder, filter bas- ket and cups) without any coffee. To do this, see section entitled “Espresso Making” above.

. Preparing an espresso:

• Fill the water tank (1) (2) (3) and turn on the machine (4).

1	2
	Espresso

3

Espresso

4
Espresso	Caffé

Positioning the E.S.E. pod (18).

18

Tear excess paper from pod at perforated edge. Place the E.S.E. pod with the RED MAR- KING FACE DOWN (bend the paper corners down) in the E.S.E. filter holder fitted with its own filter.

•Take care to put all the paper inside the filter basket to prevent water dripping. Placing the E.S.E. pod correctly will create a richer, thicker crema.

Locking the handle tightly and properly will also help avoid leakage from the filter holder and ensure a better brewing cycle.

Place the filter holder inside the brewing head and firmly turn the handle as far right as possible (6) (7) (8).

6 Espresso

7 Espresso

8

As soon as the appliance reaches the right temperature, the orange temperature control light switches off.

• Turn the selector knob (O) to espresso mode (9). Take the pre-brewing into account.

9

Espresso

14 KRUPS