Krups XP2000, XP2010 manual Using Ground Espresso, Preparing an espresso

Page 10

. USING GROUND ESPRESSO

For best results, we recommend that you first pre-heat the accessories (filter holder, filters and cups) without putting in ground coffee. To do this:

• Fill the water container with fresh, cold water (1) (2) (3) and turn on the machine (4).

1

2

 

Espresso

3

Espresso

4

 

Espresso

Caffé

Put the filter holder and an empty filter in place (6) (7), and place the espresso cups underneath.

6

Espresso

 

7

Espresso

 

As soon as the appliance reaches the right temperature, the orange temperature control light switches off (P).

Turn the selector knob (O) to espresso mode (9). Take the pre-brewing into account.

9

Espresso

The cups will fill with hot water. Once filled, turn the selector knob (O) back to the central position and empty the cups.

After making your first espresso and the machine is warmed, the espresso cups can then be pre-heated on the cup warming plate.

. Preparing an espresso:

• Fill the water container (1) (2) (3) and turn on the machine (4).

1

2

 

Espresso

3

Espresso

4

 

Espresso

Caffé

11 KRUPS

Image 10
Contents F088 XS1000 English Important Safeguards Short Cord Instructions Regarding your Cord SetKrups Espresso Coffee Before First Use DescriptionGetting Started EspressoEspresso Using the various functions of your espresso machine Making EspressoUsing Ground Espresso Preparing an espressoKrups Using the Special E.S.E. Filter Fill the water tank 1 2 3 and turn on the machine Using the Cappuccino accessory F Steam FunctionKrups Recipes Espresso flambé Cleaning the MachineFriesian coffee Drip trayCappuccino accessory DescalingTroubleshooting Problems Probable causes Corrective actionsPress firmly down on the water Coffee Before First Use CleaningMaking Coffee You may use Event of a problemThere seems to be a leak Limited Warranty USA