Hotpoint 25, 22 owner manual Transfer Door Stops, Transfer Bottom Hinge Bracket to the Left

Page 18

Installation Instructions

REVERSING THE DOOR SWING (CONT.)

4

TRANSFER BOTTOM HINGE BRACKET TO THE LEFT

Remove the base grille by pulling it straight out.

Using a socket driver, move the bottom hinge bracket from the right side to the left side.

NOTE: If the washer is not on the hinge bracket, check to see if it is stuck to the bottom of the door.

5

TRANSFER CENTER HINGE BRACKET TO THE LEFT

Remove the center hinge bracket by removing the three screws.

NOTE: Keep these screws with the hinge bracket. They are long screws and will be used when installing the hinge on the other side.

You will need to remove the color-matched cap from the screw head before you can remove the screw. Use the edge of a thin flat blade to gently pry the caps off the screw heads. (A putty knife works well for this.) Cover the blade with tape to prevent scratching the paint.

Remove the mullion cover from the left side using the thin flat blade. Assemble it to the right side.

Remove the screw from the center left side of the cabinet. Screw it into the holes on the right side.

Place the center hinge bracket over the holes at the center left side of the cabinet. Insert and tighten the three long screws.

Replace the cap by snapping it over the screw with your finger.

Screw Cap

Mullion Cover

6

TRANSFER DOOR STOPS

On each door, move the metal door stop from the right to the left.

Move any screws from the left to the right.

18

Image 18

Contents Refrigerators Write the model and serial numbers here Model # Serial #Off setting RefrigerantsHOW to Connect Electricity Instructions Troubleshooting TipsLocking the Controls on some models About the controls on the refrigeratorTouch pad controls To lock the controlsSpillproof Shelves on some models About the shelves and binsRearranging the Shelves To removeSlide-Out Spillproof Shelf on some models Adjustable Bins on the DoorNon-Adjustable Shelves on the Door Freezer Tilt Out Bin on some modelsAbout the additional features About the crispers and pansAbout the automatic icemaker Icemaker Accessory KitAbout crisper removal Crisper RemovalCare and cleaning of the refrigerator Freezer Compartment Light on some models Replacing the light bulbsRefrigerator Compartment Freezer Compartment Dome Light on some modelsClearances Water Supply to the IcemakerRefrigerator Location RollersBefore YOU Begin What YOU will NeedShut OFF the Main Water Supply Choose the Valve LocationDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingConnect the Tubing to the Refrigerator Turn the Water on AT the Shutoff ValveImportant Notes Plug in the RefrigeratorStart the Icemaker Tools YOU will NeedRemove the Freezer Door Remove the Refrigerator DoorTransfer TOP Hinge to the Left Transfer Door Stops Transfer Bottom Hinge Bracket to the LeftTransfer Refrigerator Door Handle to the Right Long HandleRehang the Refrigerator Door Rehang the Freezer DoorNormal operating sounds HummmBefore you call for service… Instructions OperatingOdor/taste See Care and cleaningIce cubes have No ice cubeWhat Is Not Covered We Will ReplaceOne Year Page Troubleshooting Tips Page Consumer Support Hotpoint Website Schedule ServiceParts and Accessories Real Life Design Studio

Related manuals

Manual 64 pages 18.54 Kb