Hotpoint 19 installation instructions Before YOU Begin, What YOU will Need

Page 14

Installation Instructions

INSTALLING THE WATER LINE (ON SOME MODELS)

BEFORE YOU BEGIN

Recommended copper water supply kits are WX8X2, WX8X3 or WX8X4, depending on the amount of tubing you need. Approved plastic water supply lines are GE SmartConnect™ Refrigerator Tubing (WX08X10002, WX08X10006, WX08X10015 and WX08X10025).

When connecting your refrigerator to a GE Reverse Osmosis Water System, the only approved installation is with a GE RVKit. For other reverse osmosis water systems, follow the manufacturer’s recommendations.

This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage.

Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.

To prevent burns and product damage, do not hook up the water line to the hot water line.

If you use your refrigerator before connecting the water line, make sure the icemaker power switch is in the O (off) position (on power switch models) or the feeler arm is in the STOP (up) position (on feeler arm models).

Do not install the icemaker tubing in areas where temperatures fall below freezing.

When using any electrical device (such as a power drill) during installation, be sure the device is double insulated or grounded in a manner to prevent the hazard of electric shock, or is battery powered.

All installations must be in accordance with local plumbing code requirements.

WHAT YOU WILL NEED

•Copper or GE SmartConnect™ Refrigerator Tubing kit, 1/4″ outer diameter to connect the refrigerator to the water supply. If using copper, be sure both ends of the tubing are cut square.

To determine how much tubing you need: Measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then add 8′

(2.4 m). Be sure there is sufficient extra tubing (about 8′ [2.4 m] coiled into 3 turns of about 10″ [25 cm] diameter) to allow the refrigerator to move out from the wall after installation.

GE SmartConnect™ Refrigerator Tubing Kits are available in the following lengths:

2′ (.6 m) – WX08X10002

6′ (1.8 m) – WX08X10006

15′ (4.6 m) – WX08X10015

25′ (7.6 m) – WX08X10025

Be sure that the kit you select allows at least 8′ (2.4 m) as described above.

NOTE: The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Refrigerators Write the model and serial numbers here Model # Serial #Safety Precautions Before You Throw Away Your Old Refrigerator or Freezer RefrigerantsHOW to Connect Electricity Control Settings About the controls on the refrigeratorTo remove About the shelves and binsRearranging the Shelves To replaceSpillproof Shelves on some models Safety InstructionsAdjustable Bins on the Door on some models Slide-Out Spillproof Shelf on some modelsFruit and Vegetable Crispers Adjustable Humidity Crisper on some modelsAbout the crispers and pans Crisper Removal About the additional featuresAbout crisper removal ShelfSaver RackConsumer Support About the automatic icemakerInstructions Cleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside CondenserRefrigerator Compartment-Upper Light Consumer Support TroubleshootingPreparing for Vacation Clearances Water Supply to the IcemakerRefrigerator Location Rollers and Leveling LegsBefore YOU Begin What YOU will NeedDrill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Route the Tubing Fasten the Shutoff ValveTighten the Pipe Clamp Connect the Tubing to the ValvePlug in the Refrigerator Connect the Tubing to the RefrigeratorTurn the Water on AT the Shutoff Valve Start the IcemakerRemove the Freezer Door Important NotesTools YOU will Need Remove the Refrigerator Door Transfer TOP Hinge to the LeftTransfer Door Stops Transfer Bottom Hinge Bracket to the LeftTransfer Center Hinge Bracket to the Left Transfer Refrigerator Door Handle to the Right Rehang the Freezer Door Transfer Freezer Door Handle to the RightRehang the Refrigerator Door Normal operating sounds Hummm WhooshBefore you call for service… Automatic icemaker See Installing the water lineSee Care and cleaning On some modelsFood freezing Hot air from bottomRefrigerator Orange glowGeneral Electric Company Consumer Product Ownership Registration Troubleshooting Tips Consumer Support Operating Instructions Safety Instructions GE Will Replace Installation InstructionsWhat Is Not Covered Consumer Support Hotpoint Website Schedule ServiceParts and Accessories Real Life Design Studio

19 specifications

Hotpoint 19 is a versatile and innovative kitchen appliance that seamlessly blends functionality with modern design. This refrigerator offers an ideal solution for contemporary kitchens, combining ample storage space with cutting-edge technology to enhance users' cooking and food preservation experiences.

One of the standout features of the Hotpoint 19 is its spacious interior. With a capacity that can accommodate a large family’s needs, it includes adjustable shelves and door bins, allowing users to organize their groceries efficiently. The flexible shelving makes it easy to store large items, such as pitchers or party trays, ensuring that meal prep is always convenient.

In terms of technology, the Hotpoint 19 is equipped with energy-efficient cooling systems. It employs advanced cooling technology that maintains a consistent temperature throughout the refrigerator, preventing temperature fluctuations that can harm food quality. The refrigerator also features a frost-free design, eliminating the need for manual defrosting and making maintenance easy.

The Hotpoint 19 also boasts a Multi-Air Flow system, which circulates cool air throughout the fridge to maintain a uniform temperature. This feature not only preserves freshness but also minimizes odors, keeping food tasting as it should. The inclusion of LED lighting enhances visibility inside the fridge, allowing users to quickly locate their food items.

Another notable characteristic of the Hotpoint 19 is its user-friendly control panel. The intuitive interface allows users to adjust temperature settings and monitor the appliance with ease. There are also dedicated sections for specific types of food, such as fruits, vegetables, and dairy, optimizing storage conditions for each category.

The exterior design of the Hotpoint 19 is sleek and modern, available in various finishes to match any kitchen décor. The subtle curves and stylish handles provide both aesthetic appeal and ergonomic functionality. Additionally, the appliance comes with a range of customizable options, from different color finishes to handle styles, allowing consumers to find the perfect fit for their homes.

In summary, the Hotpoint 19 combines style and practicality, making it a top choice for anyone in need of a reliable and efficient refrigerator. With its innovative features, energy-saving technologies, and sleek design, the Hotpoint 19 is an excellent addition to modern kitchens, ensuring food preservation and user convenience.
Top Page Image Contents