Hotpoint 19 Water Supply to the Icemaker, Refrigerator Location, Clearances

Page 13

Installation Instructions

Refrigerator

Models 18 and 19

If you have questions, call 800.GE.CARES (800.432.2737) or visit our Website at: www.Hotpoint.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT – Save these

instructions for local inspector’s use.

•IMPORTANT – Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation

15minutes.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

WATER SUPPLY TO THE ICEMAKER

(ON SOME MODELS)

If the refrigerator has an icemaker, it will have to

be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer or by visiting our Website at ge.com or

Parts and Accessories, 800.626.2002.

REFRIGERATOR LOCATION

•Do not install the refrigerator where the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures.

•Do not install the refrigerator where the temperature will go above 100°F (37°C) because it will not perform properly.

•Install it on a floor strong enough to support it fully loaded.

CLEARANCES

Allow the following clearances for ease of installation, proper air circulation and plumbing and electrical connections.

•Sides 1/8″ (3 mm)

•Top 1″ (25 mm)

•Back 1″ (25 mm)

If the refrigerator is to be installed next to a wall on the hinge side, allow 5/16″ (8 mm) door clearance.

ROLLERS AND LEVELING LEGS

Rollers allow you to move the refrigerator away from the wall for cleaning.

Leveling Legs near each front corner of the refrigerator, next to the rollers, should be adjusted if any of the following occurs:

•Refrigerator wobbles due to front roller not being firmly positioned on the floor.

•Door(s) do not close easily when opened to 45°.

NOTE:

•BEFORE moving the refrigerator away from the wall, be sure to turn the leveling legs counterclockwise so that the weight of the refrigerator is fully transferred to the front rollers.

•The refrigerator will not be level from front to back. It will have a slight backward tilt for proper door-closing.

To adjust the leveling legs, turn the two front leveling legs clockwise to raise the front of the refrigerator and counterclockwise to lower it.

Clockwise to raise refrigerator

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Write the model and serial numbers here Model # Serial # RefrigeratorsSafety Precautions Refrigerants Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity About the controls on the refrigerator Control SettingsRearranging the Shelves About the shelves and binsTo remove To replaceAdjustable Bins on the Door on some models Safety InstructionsSpillproof Shelves on some models Slide-Out Spillproof Shelf on some modelsAbout the crispers and pans Adjustable Humidity Crisper on some modelsFruit and Vegetable Crispers About crisper removal About the additional featuresCrisper Removal ShelfSaver RackInstructions About the automatic icemakerConsumer Support Cleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside CondenserPreparing for Vacation Consumer Support TroubleshootingRefrigerator Compartment-Upper Light Refrigerator Location Water Supply to the IcemakerClearances Rollers and Leveling LegsWhat YOU will Need Before YOU BeginChoose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveRoute the Tubing Connect the Tubing to the ValveTurn the Water on AT the Shutoff Valve Connect the Tubing to the RefrigeratorPlug in the Refrigerator Start the IcemakerTools YOU will Need Important NotesRemove the Freezer Door Transfer TOP Hinge to the Left Remove the Refrigerator DoorTransfer Center Hinge Bracket to the Left Transfer Bottom Hinge Bracket to the LeftTransfer Door Stops Transfer Refrigerator Door Handle to the Right Rehang the Refrigerator Door Transfer Freezer Door Handle to the RightRehang the Freezer Door Hummm Whoosh Normal operating soundsBefore you call for service… See Care and cleaning See Installing the water lineAutomatic icemaker On some modelsRefrigerator Hot air from bottomFood freezing Orange glowGeneral Electric Company Consumer Product Ownership Registration Troubleshooting Tips Consumer Support Operating Instructions Safety Instructions What Is Not Covered Installation InstructionsGE Will Replace Parts and Accessories Schedule ServiceConsumer Support Hotpoint Website Real Life Design Studio

19 specifications

Hotpoint 19 is a versatile and innovative kitchen appliance that seamlessly blends functionality with modern design. This refrigerator offers an ideal solution for contemporary kitchens, combining ample storage space with cutting-edge technology to enhance users' cooking and food preservation experiences.

One of the standout features of the Hotpoint 19 is its spacious interior. With a capacity that can accommodate a large family’s needs, it includes adjustable shelves and door bins, allowing users to organize their groceries efficiently. The flexible shelving makes it easy to store large items, such as pitchers or party trays, ensuring that meal prep is always convenient.

In terms of technology, the Hotpoint 19 is equipped with energy-efficient cooling systems. It employs advanced cooling technology that maintains a consistent temperature throughout the refrigerator, preventing temperature fluctuations that can harm food quality. The refrigerator also features a frost-free design, eliminating the need for manual defrosting and making maintenance easy.

The Hotpoint 19 also boasts a Multi-Air Flow system, which circulates cool air throughout the fridge to maintain a uniform temperature. This feature not only preserves freshness but also minimizes odors, keeping food tasting as it should. The inclusion of LED lighting enhances visibility inside the fridge, allowing users to quickly locate their food items.

Another notable characteristic of the Hotpoint 19 is its user-friendly control panel. The intuitive interface allows users to adjust temperature settings and monitor the appliance with ease. There are also dedicated sections for specific types of food, such as fruits, vegetables, and dairy, optimizing storage conditions for each category.

The exterior design of the Hotpoint 19 is sleek and modern, available in various finishes to match any kitchen décor. The subtle curves and stylish handles provide both aesthetic appeal and ergonomic functionality. Additionally, the appliance comes with a range of customizable options, from different color finishes to handle styles, allowing consumers to find the perfect fit for their homes.

In summary, the Hotpoint 19 combines style and practicality, making it a top choice for anyone in need of a reliable and efficient refrigerator. With its innovative features, energy-saving technologies, and sleek design, the Hotpoint 19 is an excellent addition to modern kitchens, ensuring food preservation and user convenience.
Top Page Image Contents