Hotpoint 19 Connect the Tubing to the Refrigerator, Turn the Water on AT the Shutoff Valve

Page 17

Installation Instructions

9

CONNECT THE TUBING TO THE REFRIGERATOR

NOTES:

•Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

•We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator. If using GE SmartConnect™ Refrigerator Tubing kit, you will need an additional tube (WX08X10002) to connect the filter. Do not cut plastic tube to install filter.

Remove the screws holding the right side of the access cover. Fold back the cover.

Remove the plastic flexible cap from the water valve (refrigerator connection).

Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown. On GE SmartConnect™ Refrigerator Tubing kit, the nuts are already assembled to the tubing.

Insert the end of the tubing into the water valve connection as far as possible. While holding the tubing, tighten the fitting.

For plastic tubing from a GE SmartConnect™ Refrigerator Tubing kit, insert the molded end of the tubing into the water valve connection and tighten compression nut until it is hand-tight; then tighten one additional turn with a wrench. Overtightening may cause leaks.

Fasten the tubing into the clamp provided to hold it in a vertical position. You may need to pry open the clamp.

10 TURN THE WATER ON AT THE SHUTOFF VALVE

Tighten any connections that leak.

Reattach the access cover.

11 PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall.

START THE ICEMAKER

On power switch models, set the icemaker power switch to the l (on) position. On feeler arm models, move the feeler arm to the ON (down) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically.

Power

1/4″ Tubing

SmartConnect™

Tubing

Tubing

Clamp

1/4″ Compression

Nut

Ferrule

(sleeve)

Refrigerator Connection

switch

Power switch model

Feeler Arm in the

STOP (up) position

Feeler Arm in

the ON (down) position

Feeler arm model

NOTE: In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Write the model and serial numbers here Model # Serial # RefrigeratorsSafety Precautions Refrigerants Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity About the controls on the refrigerator Control SettingsRearranging the Shelves About the shelves and binsTo remove To replaceAdjustable Bins on the Door on some models Safety InstructionsSpillproof Shelves on some models Slide-Out Spillproof Shelf on some modelsFruit and Vegetable Crispers Adjustable Humidity Crisper on some modelsAbout the crispers and pans About crisper removal About the additional featuresCrisper Removal ShelfSaver RackConsumer Support About the automatic icemakerInstructions Cleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside CondenserRefrigerator Compartment-Upper Light Consumer Support TroubleshootingPreparing for Vacation Refrigerator Location Water Supply to the IcemakerClearances Rollers and Leveling LegsWhat YOU will Need Before YOU BeginDrill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Tighten the Pipe Clamp Fasten the Shutoff ValveRoute the Tubing Connect the Tubing to the ValveTurn the Water on AT the Shutoff Valve Connect the Tubing to the RefrigeratorPlug in the Refrigerator Start the IcemakerRemove the Freezer Door Important NotesTools YOU will Need Transfer TOP Hinge to the Left Remove the Refrigerator DoorTransfer Door Stops Transfer Bottom Hinge Bracket to the LeftTransfer Center Hinge Bracket to the Left Transfer Refrigerator Door Handle to the Right Rehang the Freezer Door Transfer Freezer Door Handle to the RightRehang the Refrigerator Door Hummm Whoosh Normal operating soundsBefore you call for service… See Care and cleaning See Installing the water lineAutomatic icemaker On some modelsRefrigerator Hot air from bottomFood freezing Orange glowGeneral Electric Company Consumer Product Ownership Registration Troubleshooting Tips Consumer Support Operating Instructions Safety Instructions GE Will Replace Installation InstructionsWhat Is Not Covered Parts and Accessories Schedule ServiceConsumer Support Hotpoint Website Real Life Design Studio

19 specifications

Hotpoint 19 is a versatile and innovative kitchen appliance that seamlessly blends functionality with modern design. This refrigerator offers an ideal solution for contemporary kitchens, combining ample storage space with cutting-edge technology to enhance users' cooking and food preservation experiences.

One of the standout features of the Hotpoint 19 is its spacious interior. With a capacity that can accommodate a large family’s needs, it includes adjustable shelves and door bins, allowing users to organize their groceries efficiently. The flexible shelving makes it easy to store large items, such as pitchers or party trays, ensuring that meal prep is always convenient.

In terms of technology, the Hotpoint 19 is equipped with energy-efficient cooling systems. It employs advanced cooling technology that maintains a consistent temperature throughout the refrigerator, preventing temperature fluctuations that can harm food quality. The refrigerator also features a frost-free design, eliminating the need for manual defrosting and making maintenance easy.

The Hotpoint 19 also boasts a Multi-Air Flow system, which circulates cool air throughout the fridge to maintain a uniform temperature. This feature not only preserves freshness but also minimizes odors, keeping food tasting as it should. The inclusion of LED lighting enhances visibility inside the fridge, allowing users to quickly locate their food items.

Another notable characteristic of the Hotpoint 19 is its user-friendly control panel. The intuitive interface allows users to adjust temperature settings and monitor the appliance with ease. There are also dedicated sections for specific types of food, such as fruits, vegetables, and dairy, optimizing storage conditions for each category.

The exterior design of the Hotpoint 19 is sleek and modern, available in various finishes to match any kitchen décor. The subtle curves and stylish handles provide both aesthetic appeal and ergonomic functionality. Additionally, the appliance comes with a range of customizable options, from different color finishes to handle styles, allowing consumers to find the perfect fit for their homes.

In summary, the Hotpoint 19 combines style and practicality, making it a top choice for anyone in need of a reliable and efficient refrigerator. With its innovative features, energy-saving technologies, and sleek design, the Hotpoint 19 is an excellent addition to modern kitchens, ensuring food preservation and user convenience.
Top Page Image Contents