Using your StickMaster continued
Using the chopper attachment (Models SM6400 and SM8650)
1.Place the chopper bowl on the
2.Fit the stainless steel chopping blade into the chopper bowl.
3.Place food into the chopper bowl.
4.Attach the lid onto the chopper bowl and rotate the lid in a clockwise direction until it locks into position.
5.Insert the motor housing into the hole on the top of the chopper attachment until you hear a click. See Figure 3.
Or, with your StickMaster Pro (SM8650), you can select the optimal speed for the processing task, by turning the speed control dial from 1 to 5 and then depressing the power button (I). Speed one on the speed control dial is the slowest and speed five is the fastest.
Note: All stick mixers are designed to operate only whilst the power buttons remain depressed.
8.For an extra boost of power during operation, the turbo speed button (II) may be depressed (for model SM8650).
Note: The power button (I) should be released when selecting the turbo speed button (II).
9.To stop the StickMaster, take your finger off the power button or turbo speed button (for model SM8650).
10.To detach the chopper attachment, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 4.
Figure 3
6.Plug the power cord into a
7.Hold the bowl with one hand while operating the power button with the other. Setting (I) is low speed and setting (II) is high speed (for models SM6200 and SM6400).
Figure 4
9