Hotpoint RFM07, RFM06, RFA06, RFA07 manual Refit Lower Door, Refit Top Door

Page 17

Door Reversal

Door Reversal continued...

11.Unscrew the foot and hinge bracket fitted to the bottom right hand side of the appliance. Unscrew the foot and footplate fitted to the left hand side of the appliance.

12.Refit the hinge bracket and footplate to the opposite sides of the appliance. Screw in the feet until there is approximately 35mm projecting from the bottom front edge of the appliance.

Note : You may require assistance to do this:

13.Lift the appliance from the rear of the tabletop and stand it on its feet and wheels.

Be careful that the appliance does not run away with you when the wheels touch the floor.

Refit the spacing washers.

Refit Lower Door

14.Take off the two screw covers from the left hand centre panel and remove the two screws. Fit these screws and covers over on the right hand side.

15.Fit the centre hinge on the left hand side with the original screws, cover the screws with the original covers.

16.Using a thin blunt instrument, remove the hinge bush cap from the top left of the lower door and fit on the top right.

Note : You may require assistance to do this:

17.Place the lower door onto the lower hinge pin.

18.Offer the door up to the centre hinge.

Put the hinge pin through the centre hinge and ensure it locates into the door. Check that the hinge pin is positioned the right way up.

Refit Top Door

19.Using a thin blunt instrument, remove the hinge bush cap from the top left of the door and refit on the top right.

20.Replace the spacing washers onto the centre hinge bracket.

Note : You may require assistance to do this:

21.Place the top door hinge onto the top left of the door, slide the door onto the centre hinge pin. Support the door while screwing the top hinge into position.

Ensure that the hinge bracket locates correctly.

22.If necessary, slacken off the screws on the centre hinge pin and adjust the doors so that they line up with the cabinet.

23.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

WARNING: Failure to level the appliance correctly may result in misalignment of the cabinet and/or doors.

MAINTENANCE

CLEANING&

 

 

Note : Let the appliance stand upright in it’s final location for at least

 

15 minutes before plugging in and switching on the electricity supply.

17

 

Image 17
Contents Step For your safety, read the following advice For Your SafetyWhen installing your fridge freezer When using your fridge freezerMinimum space required to open door InstallationLocation & Air Circulation Defrost Tube LevellingChanging the Mains Lead Changing the PlugControls Controlling the Temperature of the Fridge CompartmentControlling the Temperature of the Freezer Compartment Useful Advice Storage Zones Making the best use of your Fridge FreezerStoring Food in a Fridge Commodity and Bottle Racks Advice on Adjusting ShelvesSalad Bins Freezing Fresh Food Storage GuideStoring Food in a Freezer Ice Tray Advice on Using Freezer DrawersFreezer compartment DefrostingDefrosting Fridge compartment Cleaning Interior CleaningExterior Door SealsChanging the Light Bulb MaintenanceGoing Away Door Reversal Door ReversalRemove Top Door Remove Lower DoorRefit Top Door Refit Lower DoorIs the Fridge Freezer Working AS YOU WANT? TroubleshootingOperating Sounds of a Fridge Freezer Ice builds up rapidly inside the fridgeIce builds up rapidly inside the freezer Recycling & Disposal Information Hotpoint guaranteeRepair Service and Information Help Desk After Sales ServicePage Page Repair Service and Information Help Desk After Sales ServiceGenuine Parts and Accessories Key Contacts

RFA06, RFA07, RFM07, RFM06 specifications

Hotpoint is a well-established name in household appliances, and its range of refrigerators includes models like the RFM06, RFM07, RFA07, and RFA06. These refrigerators are designed with innovative features and technologies to meet modern-day cooling needs while ensuring efficiency and convenience.

The Hotpoint RFM06 and RFM07 models are freestanding fridge freezers that offer a blend of style and functionality. With sleek designs, they are available in various colors, making them a great fit for any kitchen décor. These models are equipped with advanced cooling technology, ensuring optimal food preservation by maintaining a consistent temperature throughout the compartments. The MultiFlow cooling system distributes cold air evenly, reducing temperature fluctuations and preventing food from spoiling.

Both RFM models include adjustable shelves, providing flexibility in storage options. They also come with a built-in ice maker in the freezer compartment, making ice readily available for your drinks. Furthermore, the RFM06 and RFM07 feature energy-efficient LED lighting, which not only illuminates the interior but also consumes less energy than traditional bulbs.

On the other hand, the RFA06 and RFA07 models are designed as traditional refrigeration units, focusing on delivering spacious storage for fresh food. With a larger capacity, these models are ideal for families. They boast direct cooling technology for effective temperature control, ensuring freshness for longer periods. The RFA series also encompasses features such as removable shelves and door storage, allowing for customizable space according to your storage needs.

Safety and hygiene are also prioritized in these models, as they come equipped with antibacterial protection that helps to keep the interior clean and odor-free. In terms of energy efficiency, all four models are rated highly, easing concerns over electricity costs.

In summary, Hotpoint’s RFM06, RFM07, RFA07, and RFA06 refrigerators bring together modern design, user-friendly features, and efficient food preservation technologies. Whether you require a fridge freezer or a spacious refrigerator, these models stand out as reliable choices that cater to the needs of today’s consumers while appealing to their aesthetic sensibilities.