FREEZER - MODELS FZM80, FZA80 & FZA50
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED: To ensure that your freezer runs reliably and efficiently follow these steps.
STEP 1 |
| STEP 2 |
Choose a location for your |
| Move the freezer into |
freezer, away from any |
| position, using the sides |
heat sources and allow |
| of the cabinet. Take care |
adequate ventilation - |
| to avoid damaging the |
100mm (4 inches) |
| refrigerant circuit pipe |
gap above. |
| work on the rear. |
|
|
|
INSTALLATION | SAFETY & |
|
|
STEP 3
Level the freezer by adjusting the front feet. This will stop rocking or vibration and keep the door aligned.
NB. The spanner is for illustration only and is not supplied with the freezer.
STEP 4
After the front feet have been adjusted and the freezer is level fit the left and right hand bottom hinge covers supplied. Align with the cover plate slots and push into position.
CONTROLS |
|
|
USEFUL ADVICE |
|
STEP 5
Before plugging in and switching on, leave the freezer in its final location for at least 15 minutes to allow it to settle.
STEP 6
Plug in and switch on. Allow the freezer to cool before placing food inside.
The high temperature light will stay on until the freezer has cooled down. All food in the freezer should be covered.
MAINTENANCE | CLEANING& |
|
|
TROUBLESHOOTING |
|
STEP 7 | STEP 8 | |
If you are freezing fresh |
| |
food, turn on fast freeze by | Your freezer is now | |
pressing the switch 24 | working. | |
hours before placing the | ||
If after 24 hours your | ||
food inside. | ||
freezer is not operating as | ||
Place the fresh food | ||
inside. | you want, refer to the | |
Remember to turn fast freeze off | TROUBLESHOOTING | |
after 24 hours, however if you | section. | |
forget to do so it will automatically |
| |
cancel after 48 hours. |
|
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
GUARANTEE | SERVICE & |
|
|