Hotpoint UY46 manual Installation, All cases adhere to routing details see fig

Page 31

Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown at the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided.

Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

Where a hob is fitted above the cooker the cable connecting the hob to the cooker control unit must be of 2.5mm2 85˚C heat resistant cable to BS6141 table 15

In all cases adhere to routing details (see fig. 5).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Instructions Retention of this Instruction Book ContentsIntroduction Safety Advice Safety InformationAlways Safety Information Never Main parts of your Double Oven Control Markings ControlsAutomatic Cooking Oven Timer OperationHints on Automatic Cooking Clockface Know Your TimerSymbols Timer Function ButtonsSetting the Time of DAY Electronic Clock & Automatic Oven Timer OperationSetting the Minute Minder Auto Cooking Programmes Electronic Clock & Automatic Oven Timer Operation Other Notes on Timer Operation Top Oven Shelf Positioning for Grilling Using the Top Oven for GrillingStep Grill Pan and HandleGrill Controls Example Operation when using the Top Oven for GrillingGuideto Grilling Shelf Positioning Using the Top Oven as a Convection OvenTOP Oven Utensils Operation when using the Top Oven as a Convection OvenNever use the grill setting control a when warming plates Plate WarmingMain Oven Utensils Using the Main Oven for Fan CookingTemperature & Time Main Oven Shelf Positioning for FAN OvenOperation to Assist in Defrosting Using the Main Oven for Other FunctionsFAN only Setting Light only SettingOperation ‘S’ Slow Cook SettingPoints to Consider When Preparing Food for Slow Cooking Advantages of Slow Cooking areConventional Fan Temperature Conversion ScaleGas Main MarkTop Oven Convection Cooking If Using Aluminium FoilCooking MEAT/POULTRY in the TOP Oven Food Main Fan Oven CookingBaking Top Oven Convection Cooking Baking Main Fan Oven CookingTOP Oven Baking Cooking Results Not SatisfactoryGrill Baking GeneralCleaning Care and CleaningStayclean Oven Liners How Stayclean worksGrill Pan & Oven Shelves Cleaning GRILL, TOP Oven and Main OvenOven Doors Base & Rear of Top Oven and Base of Main OvenHOW to Clean the Lamp Lens Replacement of the Oven LampRefit the handle/outer glass assembly by opening To Clean the Inside of Outer and Inner Glass PanelsAll cases adhere to routing details see fig InstallationGeneral Final InstallationTop Top View If something goes wrong Problem CheckDisposal of old electrical appliances Disposal of your productHotpoint Service Cover Page Page Extended Warranties After Sales ServiceRepair Service and Information Help Desk Genuine Parts and Accessories
Related manuals
Manual 40 pages 623 b

UY46 specifications

The Hotpoint UY46 is a remarkable refrigerator that has captured attention for its blend of functionality, design, and advanced cooling technologies. This model seamlessly integrates into modern kitchens while providing efficient storage solutions and ensuring that food remains fresh for longer periods.

One of the standout features of the Hotpoint UY46 is its impressive capacity. With ample interior space, this refrigerator caters to families and individuals alike, providing room for bulk purchases and reducing the frequency of grocery trips. The adjustable shelves allow users to customize the layout according to their specific needs, accommodating larger items effortlessly.

Energy efficiency is another hallmark of the Hotpoint UY46. With its A+ energy rating, it is designed to consume less power, making it an environmentally conscious choice. This feature not only helps reduce carbon footprint but also lowers energy bills, making it a cost-effective solution for households.

The cooling technology in the Hotpoint UY46 is equally noteworthy. Equipped with a No Frost system, it eliminates the hassle of manual defrosting. This technology prevents ice build-up, ensuring that the appliance operates effectively and maintains optimal temperatures. The even cooling system ensures that every corner of the refrigerator is kept at a consistent temperature, keeping food items fresher for longer.

Another key characteristic is the presence of a dedicated freshness zone. This compartment is designed specifically to extend the shelf life of fruits and vegetables by maintaining ideal humidity levels. By storing produce in this compartment, users can enjoy fresher and crisper items, minimizing waste.

The Hotpoint UY46 also offers a user-friendly digital control panel, allowing for precise temperature adjustments and settings at the touch of a button. With clear displays, users can easily monitor the interior conditions, ensuring that their food is kept in optimal storage conditions.

In terms of design, the Hotpoint UY46 features a sleek, contemporary aesthetic that complements various kitchen décors. Its stainless-steel finish not only looks great but is also easy to clean and maintain.

In conclusion, the Hotpoint UY46 is a feature-rich refrigerator that combines practical design with the latest technologies to ensure food preservation, energy efficiency, and user convenience. This model is an excellent choice for anyone seeking a reliable and stylish addition to their kitchen.
Top Page Image Contents