Hotpoint DX 892 CX manual Restoring the factory settings, Standby, Cooling ventilation, Oven light

Page 10

-“Auto” and the duration alternately, if programming is automatic.

4.Press the button to begin cooking.

5.The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises.

6.When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this stage has been completed: the food can then be placed in the oven.

7.During cooking it is always possible to:

- modify the temperature by turning the THERMOSTAT knob (manual modes only);

-set the duration of a cooking mode (see Cooking Modes);

-press the button to stop cooking. In this case the appliance stores the temperature modified previously in its memory (manual modes only);

-switch off the oven by pressing the button for 3 seconds.

8. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).

!There is no preheating stage for the GRILL mode.

!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

!Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door.

!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

GB

 

The light comes on when the oven door is opened or when a cooking mode starts.

The button can be used to switch on/ switch off the light at any time.

Residual heat indicators

The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then keep the SELECTOR knob turned while

pressing the button for 6 seconds. Once the restore procedure is complete, a buzzer will sound.

The first time the button is pressed, the oven will behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no buttons are pressed for 30 minutes and the control panel

lock has not been activated, the appliance automatically reverts to standby mode. The standby mode is visualised by the high luminosity “Watch Icon”. As soon as interaction with the machine resumes, the system’s operating mode is restored.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructions for Installation and Use Build-in Electric double oven ContentsTo the User To the InstallerIntroduction Retention of this Instruction BookSafetyInformation Always NeverInstallation Tall Cabinet Ventilation 595mm Display Main parts of your DoubleOvenOverall view Control panel KnobStart-upanduse Setting the clockSetting the minute minder Control panel lockStandby Restoring the factory settingsResidual heat indicators Cooling ventilationManual cooking modes Automatic cooking modesFish mode Roast Meat modeProgramming cooking Practical cooking adviceSetting the end time for a cooking mode Programming the cooking durationSolarplusGrill This will cause overheatingUsing the grill pan kit Do not place food or dishes on the floor Oven.GB To use the oven proceed as followsPlatewarming in the top oven TopOvenTemperature Charts-Meat TopOvenTemperature Charts-Baking Cooking temperature ranges Telescopic runners and Meat panCooking Advice Table MainOven-TheIntelligentCooking SystemTemperatureConversionChart Cleaning Care and CleaningHow Stayclean works Base & Rear of Top Oven and Base of Main OvenControl Panel Inner Door Panels & GlassRemove the door inner glass as follows Refit the door inner glass as followsIf something Goes wrong GB There MAY be Nothing WrongDisposal of your product Disposal of old electrical appliancesGuarantee does not cover Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Year Parts GuaranteeParts & Accessories Hotpoint ServiceUK 08448 24 24 Republic of Ireland 01 230

DX 892 CX specifications

The Hotpoint DX 892 CX is a versatile and innovative dishwasher designed to simplify your daily cleaning tasks while delivering exceptional performance and efficiency. Aimed at modern households, it combines advanced features with a sleek design, making it a great addition to any kitchen.

One of the standout features of the Hotpoint DX 892 CX is its generous capacity. With the ability to accommodate up to 16 place settings, this dishwasher is perfect for families or those who frequently entertain guests. The spacious interior allows for the placement of larger items, such as pots and pans, without compromising on cleaning power.

Equipped with several wash programs, the DX 892 CX ensures that your dishes are treated according to their specific needs. The different settings include intensive cleaning for heavily soiled pots and a delicate cycle for fragile glassware, providing flexibility for all types of dishwashing requirements. The Eco option is particularly notable, as it maximizes water and energy efficiency, helping you save on utility bills while being environmentally friendly.

One of the key technologies featured in the Hotpoint DX 892 CX is the 3D Zone Wash, which allows for a more targeted cleaning performance. This system provides adjustable cleaning zones, enabling users to customize water pressure according to the load, ensuring that tough stains are eliminated while offering gentler care for delicate items.

The dishwasher also boasts a Quiet Motor technology, making it one of the quieter options on the market. With a noise level of just 44 dB, you can run your dishwasher without disrupting the peace of your home. Additionally, the Active Drying system uses residual heat to enhance the drying process, resulting in spotless and shine-dry dishes every time.

In terms of energy efficiency, the Hotpoint DX 892 CX scores highly, typically rated at A+++. This means reduced energy consumption without sacrificing performance, a critical aspect in today’s eco-conscious living.

Furthermore, the appliance features a sleek stainless-steel finish, providing a modern and stylish look to complement your kitchen décor. Its user-friendly interface includes an easy-to-read display and intuitive controls, making it accessible even for those who may not be tech-savvy.

In summary, the Hotpoint DX 892 CX is a feature-rich dishwasher that combines innovative technologies with practicality. With a vast capacity, customizable wash settings, and a commitment to energy efficiency, it stands out as an excellent choice for anyone looking to enhance their kitchen functionality.
Top Page Image Contents