Hotpoint DX 892 CX manual Start-upanduse, Control panel lock, Setting the clock, Starting the oven

Start-upanduse

	! The first time you use your appliance, heat the
GB
	empty oven with its door closed at its maximum
	temperature for at least 2-3 hours. Ensure that the
	room is well ventilated before switching the oven off
	and opening the oven door. The appliance may emit
	a slightly unpleasant odour caused by protective
	substances used during the manufacturing process
	burning away.
	! To make the setting process easier, keep the knob
	in position: this will increase the scrolling speed of
	the numbers on the display.
	! Each setting will automatically be stored in the
	appliance memory after 10 seconds.
	! The touch controls cannot be activated if the user
	is wearing gloves.

Control panel lock

!The control panel can be locked during the cooking as well as once the cooking has finished.

To lock the oven controls, press and hold the button for at least 2 seconds. A buzzer will sound and the TEMPERATURE display shows the key

symbol “O—n”. The icon will light up to indicate lock activation.

To deactivate the lock, press and hold the button again for at least 2 seconds.

Setting the clock

!The clock can only be set when the oven is switched off. If the oven is in standby mode,

pressing the button once will display the current time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the	button on the display will flash
for 10 seconds.
To set the clock:

1.Press button .

2.Turn the TIMER knob towards “+” and “-” to adjust the hour value.

3.Once you have reached the correct hour value,

press the button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the

clock. If the icon flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

!The minute minder may still be set whether the oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed.

To set the minute minder proceed as follows:

1.Press button .

2.Adjust the time as desired by turning the TIMER knob towards “+” and “-”.

3.Once you have reached the desired value, press

the button again.

The lit symbol will remind you that the minute minder is on. The DISPLAY will show the countdown.

To cancel the minute minder, press the button and use the knob to set the time to 00:00. Press

button again.

The icon will switch off to indicate that the minute minder has been disabled.

Starting the oven

1.Switch the control panel on by pressing the button. The appliance buzzer sounds three times (ascending) and all buttons light up in sequence.

2.Select the TOP/GRILL or MAIN oven by pressing the

TOP OVEN/ GRILL or MAIN OVEN icon.

3.Select the desired cooking mode by turning the SELECTOR knob. The display shows:

- the temperature associated with the mode, if programming manually;

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9