Hotpoint SY86P manual Electrical connection, N L, Electrical Connection

Page 16

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

•Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

•Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

•Unscrew the cable clamp screw and the contact screws L-N-6.

•Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L)Yellow-Green 6

•Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

4 2 N L

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructions for Installation and Use Electric Oven Model SY86PContents Introduction Close-up view How to use your appliance Baking Mode u Fast cooking ModeDefrosting Mode U Automatic cleaning with the fast clean functionProgramming the cooking mode Delayed cooking programmingTo cancel a programmed time Programming the cooking timeAutomatic cleaning with the fast clean function Fast clean programming Programming the fast clean cycle timeProgramming the fast clean cycle end time Delayed fast clean cycle programmingHow to remove the oven door How to Keep Your Oven in ShapeReplacing the oven lamp Practical Cooking Advice Cooking Pizza Pastry sticks to the panCooking Fish and Meat O n v e c t io n Avoid the following Safety Is a Good Habit To Get IntoIt is a good idea to do the following Installation of Built-in Ovens InstalationPower cable supply connection to the electrical mains Electrical connectionN L Electrical ConnectionTechnical Specifications Inner dimensions of the ovenInner Volume of the Oven Voltage and frequency of power supplyAfter Sales Service Repair Service and Information Help DeskGenuine Parts and AccessoriesUK 08709 077 Extended WarrantiesGuarantee Satisfaction guaranteed or your money backGuarantee terms and conditions Recycling & Disposal InformationGenuine Parts and Accessories Repair Service and Information DeskKey Contacts
Top Page Image Contents