Fastening Clamps Assembly Diagram, =20mm topBack

Installation

Before fastening the hob in place, position the seal (supplied) along the perimeter of the worktop, as shown in the figure.

Clamps are provided to fasten the hob to counters measuring from 20 to 40 mm in thickness. To fasten the hob securely, it is recommended that all the clamps be used.

Fastening Clamps - Assembly Diagram

Clamp Position for	Clamp Position for
H=30mm top	H=40mm top
	Front

Clamp Position for

H=20mm topBack

N.B: Use the clamps contained in the "accessory kit."

f)In the event the hob is not installed above a built-in oven, a wood panel must be inserted as insulation. This panel must be placed at least 20 mm from the bottom of the hob itself.

Important: Wheninstallingthehobaboveabuilt-inoven,theoven should be placed on two wooden strips; in the case of a joining cabinet surface, remember to leave a space of at least 45 x 560 mm at the back.

.	45	mm.
mm		mm.
560

When installing the hob above a built-in oven without forced ventilation,ensurethatthereareairinletsandoutletsforventilating theinteriorofthecabinetadequately.

Gas Connection for the Hob

The hob should be connected to the gas supply by an authorized installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenienceofanysubsequentremovalorservicing.Connection of the appliance to the gas mains or liquid gas tanks must be carriedoutaccordingtothesafetystandardscurrentlyinforce,and only after it is ascertained that it is suitable for the type of gas to be used. If not, follow the instructions indicated in the section entitled, “Adapting the Hob for Different Types of Gas”. If the hob is to be connected to tanks containing liquid gas, use pressure regulators that comply with current safety standards.

Important: To insure that the appliance operates safety, the gas is regulated correctly and your appliance lasts over time, make sure that gas pressure levels comply with the indications given in Table 1, “Nozzle and Burner Specifications”.

Gas Connection to Non-flexible Pipe (copper or steel)

Connection to the gas source must be done in such a way as to not create any stress points at any part of the appliance.

The appliance is fitted with an adjustable, "L" shaped connector and a gasket for the attachment to the gas supply. Should this connector have to be turned, the gasket must be replaced (supplied with the appliance).

The gas feed connector to the appliance is a threaded, male 1/2" connectorforroundgaspipe.

Gas Connection to Flexible Steel Pipe

The gas feed connector to the appliance is a threaded, male 1/2" connector for round gas pipe. Only use pipes, tubes and gaskets thatcomplywithcurrentsafetycodes. Themaximumlengthofthe flexible pipes must not exceed 2000 mm. Once the connection hasbeenmade,ensurethattheflexiblemetaltubedoesnottouch any moving parts and is not crushed.

Check the Seal

Once the hob has been installed, make sure all the connections are properly sealed, using a soapy water solution. Never use a flame.

GD74 CH, GD74, GF740, GE740TCX, GD64 specifications

The Hotpoint GD64, GE740TCX, GF740, GD74, and GD74 CH are a series of kitchen appliances designed with modern cooking needs in mind. Each model boasts unique features, ensuring homeowners can find the perfect match for their culinary endeavors.

The Hotpoint GD64 is notable for its stylish aesthetics coupled with practical functionality. This model features a double oven configuration, with one being a fan-assisted oven that ensures even heat distribution, ideal for baking and roasting. The modern energy efficiency rating also allows for reduced energy consumption without compromising performance. With a programmable timer and multiple cooking modes, it simplifies meal preparation while providing a contemporary touch to any kitchen.

Moving on to the GE740TCX, this range offers a robust cooking experience with its multifunctionality. It includes a gas burner option for those who appreciate the control and instant heat of gas cooking. Additionally, the ceramic hob surface provides a smooth and easy-to-clean area for cooking, while the integrated safety features like flame failure devices offer peace of mind. Its spacious oven allows for large meal preparations, making it an outstanding choice for family gatherings.

The GF740 model stands out with its innovative features embedded in a sleek design. This model is equipped with advanced cooking technology, including a pyrolytic self-cleaning function that saves significant time and effort. This self-cleaning feature utilizes high temperatures to carbonize food residues, allowing users to simply wipe away the ash left behind. Energy efficiency remains a priority with this model, ensuring that users can cook sustainably.

The GD74 and GD74 CH models are particularly appealing for their user-centric design and versatility. Both models embrace a variety of cooking functions, such as grilling and baking, all incorporated into a user-friendly interface. The GD74 CH variant additionally emphasizes health-conscious cooking with its grill features that enable delicious results while reducing fat content.

Across the spectrum, all models feature durable materials, modern aesthetics, and thoughtful ergonomics, ensuring they not only perform exceptionally but also enhance the visual appeal of contemporary kitchens. Whether you are a novice cook or a culinary enthusiast, the Hotpoint series provides robust solutions tailored to diverse cooking styles and preferences.