Hotpoint EG1000GX, EG1000EX installation instructions Other Notes on Timer Operation

Page 7

Step 5 Release all buttons.

OTHER NOTES ON TIMER OPERATION

A

. 2 0

OT1 4

U

 

 

 

NOTE: The Cookpot symbol disappears

A

. 2 0

OT1 6

U

 

The timer display will revert to the time of day with the 'Auto' symbol lit & 'cookpot' symbol remaining lit.

At the end of the Cook Period the 'Auto' symbol will flash and an intermittent audible tone will be heard.

The audible tone will continue until cancelled. The 'Auto' symbol will continue to flash until the timer is returned to Manual operation (see below).

1. When cooking Automatically the Cook Period can GB be checked at any time simply by pressing the

Cook Period button.

2. When cooking Automatically the End Time can be checked at any time by simply pressing the End Time button.

3. Having set a Cook Period and End Time an electronic device stores the information. The device within the timer will switch the oven(s) on and off at the required times.

4.

When setting an Auto Cooking Programme and a

 

mistake is made, to clear:-

 

(a) Press & release the Manual button.

 

(b) Start the sequence again.

5.

If at any time the display shows three flashing zero's

 

0.00 and 'Auto', it is likely that the electricity supply

 

to the oven has been interrupted. Reset the timer

 

to the correct time of day. Food in the oven may,

1 6

. 2 0

Step 6 Press the Manual

button. The audible tone will be

 

 

 

 

cancelled and the oven(s) will be

 

 

returned to Manual.

Step 7 Turn the oven control(s) to the OFF position.

TO CANCEL AN AUTO COOKING PROGRAMME BEFORE THE COOK PERIOD HAS FINISHED.

Step 1 Turn the oven control to the OFF position.

1 5 . 0 0

Step 2 Press the Manual button to return the oven to "Manual" operation. The 'Auto' symbol will go out.

Note 1 When cooking automatically the Cook Period can be checked at any time by simply pressing the Cook Period button.

therefore, not have been cooked, before serving

check food is thoroughly heated and completely cooked.

6. To set each function always press and hold the required function button and at the same time press "+" or "-" buttons.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions ContentsPlease Read this Booklet Carefully IntroductionFor your Safety Guidance on Automatic Cooking Oven Timer OperationSymbols Automatic CookingAuto Cooking Programme Timer Function ButtonsSetting the Time of DAY Setting the Minute MinderImmediately and OFF Automatically After a SET Cook Period Auto Cooking ProgrammesOther Notes on Timer Operation Do not HotplateAlways USE Never USEHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGriddle Model EG1000GX only Method Some Recipe ideas for your GriddleWelsh Cakes Potato CakesStandard Grill PAN and Handle Twin GrillTo USE the Grill To Prepare Meat and Poultry for Roasting in Your FAN Oven Temperature and TimeFan Oven Oven PositionsOven Control Conventional OvenTo Prepare Meat for Roasting in Your Conventional Oven Conventional Oven Oven Cooking Chart MeatFan Oven Cooking Food Oven Cooking Chart BakingWarming Compartment Slow Cook SettingPreparing Food for Slow Cooking Replacement of Oven Light Bulb Care and CleaningHeat Clean Liners Cleaning the Griddle PlateCooker Finish Cleaning Method Wrong with your cooker Something Wrong with your CookerDisposal of your product Installation Burner Unpacking the Cooker Conversion for USE on Butane GB or PropaneSpace for Fixing Cooker HoodsStability Bracket Electrical Connection Installation & Operational ChecksSatisfaction Guaranteed or Your Money Back Hotpoint Service CoverPage Page GBGuarantee After Sales Service Xerox Business Services
Top Page Image Contents