Hotpoint HL500G manual Installation of Eye-Level Grill

Page 8

Installation of Eye-Level Grill

1.Unpack the product.

2.Unscrew the lid which protects the gas supply connection attachment for the Grill.

3.Remove the rear cover protecting the Grill assembly, which is fixed in place with 6 screws (see photograph).

4.Join the Grill assembly to the cooker. To do this, it will be necessary to "jump" the gas attachment by folding the Grill assembly to 45° (see photograph).

5.Fix the Grill assembly to the cooker using three screws on the right-hand side and three screws on the left- hand side as shown in the photograph, using the screws supplied.

8

Image 8

Contents Our Ideas. Your Home Contents Introduction Installation Installation of the cookerConnecting the gas supply Gas connectionDisposing of the appliance Adapting the cooker to different types of gasAdapting to different types of gas Adapting the gas grill to different types of gas Installation of Eye-Level Grill Page Burner and Nozzle Specifications HL500GSafety Information AlwaysSafety Information Never Extinguisher is likely to tip the pan overFeatures Control Panel Control Knobs for the gas burnersElectronic Ignition For the Gas Hob Only available on certain modelsBurner Cookware diameter cm Practical Advice on Using the BurnersUse of Hotplates Burner GrillingRelighting Oven Setting Temperature C OvenOven Cooking Chart Soft MargarineCare and Cleaning Oven Baking Problem Check GrillingCooking Results Not Satisfactory? Something Wrong with your Cooker? If all burners fail to igniteTechnical Characteristics BatteryMain Oven BurnersPage Page Page After Sales Service Guarantee Key Contacts