Hotpoint FDEL 3101 Experience manual Troubleshooting, See After Sales Service

Page 14

Troubleshooting

 

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance

EN

(see After Sales Service).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

 

 

 

 

 

 

The dishwasher does not start

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

 

 

 

or cannot be controlled

approximately one minute and reset the program.

 

 

 

 

• The appliance has not been plugged in properly.

 

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

 

 

 

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

 

 

 

 

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

 

 

 

dishwasher.

• The water inlet hose is bent (see Installation).

 

 

 

 

• The drain duct is blocked.

 

 

 

 

• The filter is clogged up with food residues.

 

 

 

 

 

 

 

 

The dishwasher makes

• The dishes are rattling against each other or against the sprayer arms.

 

 

 

excessive noise.

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

 

 

 

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

 

 

 

covered in a white film or

hardness of the water (see Rinse aid and salt).

 

 

 

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

 

 

 

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

 

 

 

streaked or have a bluish tinge.

 

 

 

 

 

 

 

 

 

The crockery has not been

• A wash cycle without a drying program has been selected.

 

 

 

dried properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and salt).

 

 

 

 

• The rinse aid dispenser setting is not suitable.

 

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

 

 

 

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

 

 

 

• The crockery has not been arranged well.

 

 

 

 

• The sprayer arms cannot move freely.

 

 

 

 

• The wash cycle is too gentle (see Wash cycles).

 

 

 

 

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

 

• The filter is dirty or blocked (see Care and maintenance).

 

 

 

 

• The refined salt level is low (see Rinse aid and salt).

 

 

 

 

 

 

 

 

The dishwasher does not take

• There is no water in the mains supply.

 

 

 

any water in/Tap shut-off alarm

• The water inlet hose is bent (see Installation).

 

 

 

 

• Turn on the tap and the appliance will start after a few minutes.

 

 

 

(the Drying and End indicator

• The appliance is locked because no action was taken when the indicator lights

 

 

 

lights flashes).

were flashing. Switch off the machine using the ON/OFF button, turn on the tap

 

 

 

 

and switch the machine back on after 20 seconds by pressing the same button.

 

 

 

 

Re-programme the machine and restart the wash cycle.

 

 

 

 

 

 

 

 

Water inlet hose alarm/Water

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap to

 

 

 

inlet filter blocked.

eliminate the risk of flooding and remove the plug from the electrical socket. Make

 

 

 

(the Washing, Drying and End

sure the water inlet filter has not become blocked by various impurities. (see “Care

 

 

 

indicator lights flashes).

and maintenance” chapter).

 

 

 

 

 

 

*Only available in selected models.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Instruction booklet Technical data InstallationAdvice regarding the first wash cycle Positioning and levellingThis appliance must be earthed Electrical ConnectionChanging the Plug Changing the Mains LeadSink Waste System Connecting the water suppliesConnecting the water inlet hose Anti-flooding protection Ecodesign RegulationControl panel Description of the applianceOverall view Upper rack Loading the racksLower rack and cutlery basket Measuring out the detergent Start-up and useStarting the dishwasher Adding extra crockeryHalf load Delayed startWash options Multi-functional tabletsWash cycles Liquid Tablets Include ±10%Rinse aid and refined salt Adjusting the amount of rinse aidSetting the water hardness Measuring out the rinse aidCare and maintenance Saving energy and respecting Environment Precautions and adviceGeneral safety Disposal of old electrical appliancesTroubleshooting See After Sales ServiceEssential Contact Information After Sales ServiceParts and Accessories Appliance RegistrationYear Parts Guarantee GuaranteeMonths Parts and Labour Guarantee Extended Guarantees

FDEL 3101 Experience specifications

The Hotpoint FDEL 3101 is a modern appliance that perfectly combines functionality with style. Designed to cater to the needs of today’s busy households, this model stands out in the competitive market of built-in dishwashers. One of its main features is its impressive capacity. The FDEL 3101 can comfortably accommodate up to thirteen place settings, making it an ideal choice for large families or those who love to entertain.

One of the standout technologies in the Hotpoint FDEL 3101 is the innovative FlexiWash system. This allows users to customize the loading space by rearranging the adjustable racks and folding tines, ensuring that every dish, pot, and pan is thoroughly cleaned. Additionally, the dishwasher offers multiple wash programs, including a rapid wash cycle, which can deliver pristine results in just 30 minutes. This is particularly useful for busy individuals who need clean dishes in a hurry.

The FDEL 3101 also boasts Hotpoint’s dedicated Intense Care technology. This unique feature is designed to protect fragile glassware while still providing a powerful wash. With specific washing zones, users can choose a gentle cycle for delicate items and a more vigorous cycle for heavily soiled pots and pans, ensuring both effective cleaning and care.

Energy efficiency is another defining characteristic of the Hotpoint FDEL 3101. This appliance is rated A++ for energy consumption, helping households reduce their carbon footprint while enjoying the convenience of modern dishwashing. The Eco Cycle mode further enhances energy savings by optimizing water usage and wash time, making it an environmentally friendly option.

Noise levels are often a concern with dishwashers, but the FDEL 3101 operates at a quiet 44 dB, ensuring minimal disruption during wash cycles, whether during the day or at night. Smart features, including a delayed start function, allow users to schedule washes at their convenience, making it easier to manage household tasks efficiently.

Overall, the Hotpoint FDEL 3101 embodies a blend of advanced technology and user-friendly features. With its spacious interior, flexible wash options, and energy-efficient performance, it is a smart addition to any kitchen, promising to make dishwashing a hassle-free experience.
Top Page Image Contents