D ISHWASHER
Fault Area
Issue | Cause/How to resolve… |
Poor Drying Results
The Dishwasher Will Not Drain
PossibleInstallationFault
(Particularly if the machine is being used for the first time)
-Check
-Isthedrainhosekinked?
- Is the sink trap blocked? (If this is the case you will experience problems with your sink drainage).
-Ensuretheblankingplug/closed end connectionhasbeen removed if connected to a sink trap (this is the most common fault when installing a dishwasher).
Ensure drain hose is not kinked
Remove blanking plug/closed end connection from sink trap.
Note:
Therearetwotypesofsinktrap drainhoseconnection.
1.Closedendconnection:
Which must be cut off.
2.Blankingpluginthesinktrap connections:
Which must be removed.
General | UnusualAmountoffoamis |
| created |
DishwasherStoppingDuring
Cycle
-Has the correct detergent been used? (Use only Dishwasher powder or tablets).
-Haveyouspiltrinseaidwhenfilling therinseaidcompartment?If yes, this will clear on the next cycle.
-Hastherebeenapowerfailure,checkotherappliances?
-Yourdishwasherwillstopandstartthroughoutthewash programme.Thisisnormal.
-Hasthewatersupplybeeninterrupted?
KnockingNoisecomingfrom | - Spray arm knocking against dishes (See “Loading Your |
Dishwasher | Dishwasher” Section of the instruction book). |
| |
KnockingNoiseComingfrom | |
InletValves | effectuponthedishwasherfunctions. |
| - If your cold water mains pressure is set too high, the noise level will |
| beincreased. |
If you have completed all of the above checks and your appliance is still not
operating, then please call your Service Centre for assistance.
See “Key Contacts” on the back page of the instruction book.
20