Hotpoint FDW80 Poor Drying Results, Follow instructions below on how to select Extra Dry, Cap

Page 19

Fault Area

Issue

Cause/How to resolve…

Poor Drying Results	QuickWashProgramme
	Selected

Pre-WashProgrammeSelected

Is Rinse Aid being used or is the

Rinse Aid level set too low?

-ThereisnodryingcycleontheQuickWashProgramme,unless youhaveselectedthe“ExtraDry”option.

Follow instructions below on how to select “Extra Dry”

Step 1: Press button marked “M” until the “Extra Dry” cycle indicator is highlighted & “OFF” is illuminated in the display.

Step 2: Activate the “Extra Dry” option by pressing the button marked “S” until “ON” is illuminated in display.

-ThereisnodryingcycleonthePre-WashProgramme.

-Usingrinseaidinyourwashwillimprovethedryingperformance.

To add rinse aid to your wash follow instructions below:

Step 1: Rotate cap anti-clockwise and pull to remove.

Step 2: Pour rinse aid into container and secure cap back into position.

Cap

The level of rinse aid used during your wash cycle can be adjusted to ensure best results.

Rinse Aid Levels 1 (lowest) to 6 (Highest)

Rinse Aid level adjuster is locatedunderdispensercap. Usingsmallcoinrotateadjusterto desiredsetting.

(We recommend setting to 4).

Rinse Aid Adjuster

19

Image 19

Contents Troubleshooting inside Instructions for Installation and UseIshwasher Contents If your family includes children Electrical ConnectionMains plug must be easily accessible after installation For your SafetyLevelling Installation600 Detergent Before Using your DishwasherRinse aid Filling the salt container To the + settingWhen to add salt Screw the cap back in place carefullyLoading your Dishwasher Controls Getting to know your Dishwasher97/17/CE Labelling How to use your Dishwasher ‘Aquasensor’ wash cycles Programme ChartGoing away Care and CleaningFilter assembly SealsCause/How to resolve… TroubleshootingAlternatively Cause/How to resolve…Messages In The Display END flashing In DisplayAL05 in Display Fault Area Issue Cause/How to resolve…Messages In The Display Demo Lit in Display StepTo adjust the upper basket position, follow Fault Area IssueInstructions below Cap Follow instructions below on how to select Extra DryPoor Drying Results To add rinse aid to your wash follow instructions belowWhich must be cut off Poor Drying Results Dishwasher Will Not DrainWhich must be removed General Comp.2 and Comp.3 see table at the end Loading the Rinse Aid Loading the detergentGenuine Parts and AccessoriesUK 08709 077 Repair Service and Information Help DeskExtended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backGenuine Parts and Accessories Repair Service and Information DeskMay 2004