Hotpoint LTF 11S112 manual Anti-flooding protection, Advice regarding the first wash cycle

Page 7

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

Anti-flooding protection*

To ensure floods do not occur, the dishwasher:

-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti-flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it contains live electrical parts.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed

Advice regarding the first wash cycle

GB

After the installation, remove the stoppers from the racks and the

 

retaining elastic elements from the upper rack, if any.

 

 

Immediately before the first washing, completely fill the salt

 

dispenser with water and add only then approximately 1 kg of salt

 

(see chapter entitled Rinse aid and refined salt). The water may

 

overflow: this is normal and is not a cause for concern. Select

 

the water hardness value (see chapter entitled Rinse aid and

 

refined salt). - After the salt has been poured into the machine,

 

the LOW SALT indicator light* switches off.

 

 

If the salt dispenser is not filled, the water softener and the

 

 

 

 

 

heating element may get damaged as a result.

 

The machine has a buzzer/set of tones (depending on the

 

dishwasher model) to inform the user that a command has

 

been implemented: power on, cycle end etc.

 

The symbols/indicator lights/LEDs on the control panel/

 

display may vary in colour and may have a flashing or fixed

 

light (depending on the dishwasher model).

 

The display provides useful information concerning the

 

type of wash cycle, wash cycle phase, remaining time,

 

temperature etc.

 

*Only available in selected models.

7

Image 7
Contents LTF 11S112 Instructions for useHotpoint Product FicheSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Positioning and levelling InstallationElectrical Connection Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleControl panel Description of the applianceLower rack Tip-up compartments with adjustable positionLoading the racks Upper rackDamage to glass and crockery Adjusting the height of the upper rackThird rack Unsuitable crockeryStarting the dishwasher Start-up and useMeasuring out the detergent Wash cycle Wash cyclesWash options Special wash cycles and OptionsMeasuring out the rinse aid Adjusting the amount of rinse aidSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage 195110470.04