Special wash cycles and Options
Notes:
Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings.
To reduce consumption even further, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com
Extra drying | GB |
To improve the dryness level of the crockery, press the EXTRA DRYING button, the indicator light/symbol will illuminate. If it is pressed again the option will be deselected. A higher temperature during the final rinse and an extended drying phase allow for improving drying.
The EXTRA DRYING option increases the duration of the wash cycle.
Wash options
If an option is not compatible with the selected wash cycle (see table of wash cycles), the corresponding LED/Symbol flashes rapidly 3 times and beeps will sound.
Delayed start
The start of the wash cycle may be delayed for a period of time between 1 and 12 hours.
1.Press the DELAYED START button: the corresponding symbol appears on the display; each time you press the button, the time
(1h, 2h, etc. up to max. 12h) from the start of the selected wash cycle will be increased.
2.Select the cycle and close the door: the timer will begin counting down;
3.Once this time has elapsed, the indicator light switches off and the wash cycle begins.
To adjust the delay time and select a smaller period of time, press the DELAYED START button. To cancel it, press the button repeatedly until the selected delayed start indicator light/symbol switches off. The wash cycle will start automatically as soon as the door is shut.
Multi-functional tablets
This option optimises washing and drying results. When using
The use of tablets is only recommended when the
This option is not recommended for use with wash cycles which do not specify the use of
ACTIVE OXIGEN
This device releases ozone molecules into the dishwasher, i.e. a natural substance that reduces unpleasant odours.
It should be used between two different wash cycles and ONLY after soiled crockery has been loaded.
To start the ACTIVE OXYGEN option press and hold the button
O3. The option will stay active either for 24 hours or until the wash cycle is started. More items can be introduced at any time until full load.
The typical faint odour that can be smelt inside the dishwasher - the same as you sometimes get with storms - is due to the ozone produced by lightning discharges. This is normal. The device produces just a small quantity, which soon decays.
No replacement needed.
Zone Wash
This option makes it possible to carry out the wash cycle in the selected rack only. Select the wash cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack only. Press the button again to deselect the option.
The option is available with the following wash cycles: Intensive and Normal.
Select the option and the Intensive cycle to start the ULTRAINTENSIVE ZONE washing. This wash cycle is ideal for very soiled mixed loads, e.g. pans and saucepans, dishes with heavy encrustation or
Select the option and the Normal cycle to start the SAVING ZONE washing. This function makes it possible to reduce energy consumption. Cycle duration might change.
Remember to load the crockery in the selected rack only
*Only available in selected models.
13