Hotpoint BFI 670 manual Installation, Positioning and levelling, Technical data

Page 2

Installation

EN

￿ Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

 

or moved, please ensure the manual is kept with the

 

 

machine, so that the new owner may benefit from the

 

advice contained within it.

 

￿ Please read this instruction manual carefully: it

 

contains important information regarding the safe

 

installation, use and maintenance of the appliance.

 

￿ If the appliance must be moved at any time, keep it

 

in an upright position; if absolutely necessary, it may

 

be tilted onto its back.

Positioning and levelling

1. Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4. Adjust the height of the rear feet from the front of the appliance*: use a screwdriver to tighten or loosen the screws on the lower part of the dishwasher.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add approximately 2 kg of salt (see Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. It is also normal that the LOW SALT* indicator light continues to flash for a few cycles after the salt has been loaded.

Technical data

 

 

 

 

Dimensions

width 59.5 cm

height 82 cm

 

 

 

depth 57 cm

 

 

 

Capacity

12 standard place-settings

 

 

Water supply

30 Kpa ÷ 1Mpa (0.3 ÷ 10 bar)

pressure

4.3 psi – 145 psi

 

 

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

 

 

Fuse

See appliance data plate

 

 

 

 

 

 

 

This dishwasher conforms to

 

 

 

the following European

 

 

 

Community Directives:

 

 

 

-73/23/EEC dated 19/02/73

 

 

 

(Low Voltage) and subsequent

 

 

 

modifications

 

 

 

-89/336/EEC dated 03/05/89

 

 

 

(Electromagnetic Compatibility)

 

 

 

and subsequent modifications

 

 

 

-97/17/EC (Labelling)

 

 

 

-2002/96/ CE Waste

 

 

 

Electrical and Electronic

 

 

 

 

 

 

Equipment (WEEE)

 

 

 

 

* Only available in selected models.

2

Image 2
Contents Instruction booklet Positioning and levelling InstallationTechnical data Electrical Connection LiveConnecting the water supplies Sink Waste System Control panel Description of the applianceOverall view Cutlery basket Loading the racksLower rack Upper rackLoading the detergent Start-up and useStarting the dishwasher Washing optionsWash cycles Wash cycle tableLoading the refined salt Rinse aid and refined saltLoading the rinse aid Cleaning the sprayer arms Care and maintenanceCleaning the dishwasher Preventing unpleasant odoursDisposal of old electrical appliances Precautions and adviceGeneral safety Saving energy and respecting the environmentRecycling & Disposal Information Troubleshooting Malfunction Possible causes / SolutionsInformation for Test Labs Essential Contact Information After Sales ServiceParts and Accessories Appliance RegistrationGuarantee Guarantee terms and conditionsPage Page 195058373.00

BFI 670 specifications

The Hotpoint BFI 670 represents a perfect blend of functionality and cutting-edge technology in the realm of built-in freezers. This appliance is designed to cater to the modern kitchen with efficiency, style, and superior performance. Standing out in the lineup of Hotpoint products, the BFI 670 combines ample storage space with innovative features, making it a valuable addition for any household.

One of the main features of the Hotpoint BFI 670 is its generous capacity, which provides ample space for all your frozen goods. With a net capacity of approximately 230 liters, it offers a practical solution for families who need to store large quantities of food. The adjustable shelves and drawers allow for easy organization, ensuring that everything can be stored in an accessible manner.

The BFI 670 is equipped with advanced freezing technologies that enhance its efficiency. One such feature is the Fast Freeze function, which enables users to freeze fresh food quickly, locking in nutrients and flavor while preventing the degradation of previously frozen items. This technology is particularly useful when storing food for extended periods, maintaining optimum quality and freshness.

Temperature control is another area where the BFI 670 excels. With precise temperature regulation, the appliance ensures that your frozen items remain at an ideal temperature. Moreover, the No Frost technology eliminates the need for manual defrosting by circulating cold air evenly throughout the freezer. This not only saves time but also prevents ice build-up, optimizing storage space.

Energy efficiency is a priority in the design of the Hotpoint BFI 670, achieving an impressive rating that helps reduce electricity bills while being eco-friendly. Consumers can rely on this appliance to be energy-conscious without compromising on performance. The appliance also features LED lighting, illuminating the interior and making it easier to find items even during late-night snacks.

In terms of design, the Hotpoint BFI 670 showcases a sleek, modern aesthetic that complements any kitchen decor. Its integrated design allows for a seamless look, making it an unobtrusive yet functional choice.

Safety features are also integrated into the BFI 670. It comes with an audible alarm that alerts users if the door is left open, preventing temperature rises that could lead to food spoilage. Furthermore, the appliance is designed with a child lock to ensure that it remains secure and safe for families with young children.

In conclusion, the Hotpoint BFI 670 is an advanced built-in freezer that provides ample storage, innovative freezing technologies, energy efficiency, and safety features. Its stylish design and practical functionality make it an excellent choice for those looking to enhance their kitchen experience.