Hotpoint BFI 670 manual Start-up and use, Starting the dishwasher, Loading the detergent

Page 8

Start-up and use

Starting the dishwasher

EN

1.Turn the water tap on.

2.Open the door and press the ON/OFF button: the indicator light will illuminate.

3.Measure out the detergent (see below).

4.Load the racks (see Loading the racks).

5.Select the programme by pressing the WASH CYCLE SELECT button; the corresponding indicator light will illuminate.

6.Select the wash options (see below).

7.Start the wash cycle by shutting the door: the machine will emit a confirmation beep.

8.At the end of the cycle two short beeps will sound and the WASH CYCLE indicator light will flash. Open the door, switch off the appliance by pressing the ON/OFF button, shut off the water tap and unplug the appliance from the electricity socket.

9.Wait for a few minutes before removing the crockery, in order to avoid burns. Unload the racks, beginning with the lower level.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has only just begun: open the door, taking care to avoid the escaping steam, and press the WASH CYCLE SELECT button, holding it for 4 seconds. After one long beep and three short beeps, the WASH CYCLE indicator light will switch off: select the new wash cycle and start the programme by shutting the door.

Adding extra crockery

Open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Close the door: the cycle starts from the point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored.

Loading the detergent

A successful wash also depends on the correct amount of detergent being used, as recommended by the manufacturer. Exceeding the recommended amount does not result in a more effective wash and pollutes the environment.

￿To obtain the best results from each washing and drying cycle, powder detergent, rinse aid liquid and salt should be used.

compartment A: Washing detergent

compartment B: Pre-wash detergent

1.Open cover C by

D

 

pressing button D.

 

 

A

B

2. Pour in the detergent

 

 

 

 

after consulting the Wash

 

 

 

 

cycle table:

 

 

 

 

 

 

 

 

• for powder detergent use compartments A and

B

• for tablets, use compartment A and the

Cbottom of the appliance,

i.e. when the cycle requires 1 tablet, place it in compartment A and close the cover; when it requires 2, place the second tablet at the bottom of the appliance.

3.Remove detergent residues from the edges of the compartment and close the cover until it clicks.

Washing options

Extra drying*

To make sure that the crockery is completely dry at the end of the cycle, press the EXTRA DRYING button before selecting the wash cycle. A prolonged beep will sound to indicate that this option has been selected and a short beep will sound to indicate when it has been deselected.

￿This option is incompatible with the soak cycle.

￿If the Extra drying option is selected, the wash cycles will last longer.

* Only available in selected models.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Instruction booklet Positioning and levelling InstallationTechnical data Electrical Connection LiveConnecting the water supplies Sink Waste System Control panel Description of the applianceOverall view Loading the racks Lower rackCutlery basket Upper rackStart-up and use Starting the dishwasherLoading the detergent Washing optionsWash cycles Wash cycle tableLoading the refined salt Rinse aid and refined saltLoading the rinse aid Care and maintenance Cleaning the dishwasherCleaning the sprayer arms Preventing unpleasant odoursPrecautions and advice General safetyDisposal of old electrical appliances Saving energy and respecting the environmentRecycling & Disposal Information Troubleshooting Malfunction Possible causes / SolutionsInformation for Test Labs After Sales Service Parts and AccessoriesEssential Contact Information Appliance RegistrationGuarantee Guarantee terms and conditionsPage Page 195058373.00

BFI 670 specifications

The Hotpoint BFI 670 represents a perfect blend of functionality and cutting-edge technology in the realm of built-in freezers. This appliance is designed to cater to the modern kitchen with efficiency, style, and superior performance. Standing out in the lineup of Hotpoint products, the BFI 670 combines ample storage space with innovative features, making it a valuable addition for any household.

One of the main features of the Hotpoint BFI 670 is its generous capacity, which provides ample space for all your frozen goods. With a net capacity of approximately 230 liters, it offers a practical solution for families who need to store large quantities of food. The adjustable shelves and drawers allow for easy organization, ensuring that everything can be stored in an accessible manner.

The BFI 670 is equipped with advanced freezing technologies that enhance its efficiency. One such feature is the Fast Freeze function, which enables users to freeze fresh food quickly, locking in nutrients and flavor while preventing the degradation of previously frozen items. This technology is particularly useful when storing food for extended periods, maintaining optimum quality and freshness.

Temperature control is another area where the BFI 670 excels. With precise temperature regulation, the appliance ensures that your frozen items remain at an ideal temperature. Moreover, the No Frost technology eliminates the need for manual defrosting by circulating cold air evenly throughout the freezer. This not only saves time but also prevents ice build-up, optimizing storage space.

Energy efficiency is a priority in the design of the Hotpoint BFI 670, achieving an impressive rating that helps reduce electricity bills while being eco-friendly. Consumers can rely on this appliance to be energy-conscious without compromising on performance. The appliance also features LED lighting, illuminating the interior and making it easier to find items even during late-night snacks.

In terms of design, the Hotpoint BFI 670 showcases a sleek, modern aesthetic that complements any kitchen decor. Its integrated design allows for a seamless look, making it an unobtrusive yet functional choice.

Safety features are also integrated into the BFI 670. It comes with an audible alarm that alerts users if the door is left open, preventing temperature rises that could lead to food spoilage. Furthermore, the appliance is designed with a child lock to ensure that it remains secure and safe for families with young children.

In conclusion, the Hotpoint BFI 670 is an advanced built-in freezer that provides ample storage, innovative freezing technologies, energy efficiency, and safety features. Its stylish design and practical functionality make it an excellent choice for those looking to enhance their kitchen experience.
Top Page Image Contents