Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

• To a suitable cold water connection point: before

attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

Ensure the fill hose is only fitted to the cold water supply. DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Standpipe

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with ‘retaining flaps*’, ensure they are inserted fully into the standpipe. This will prevent the pipe from jumping out

during installation and use.

DO NOT position the standpipe near an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in the diagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your household sink.

It MUST NOT be connected to a surface water drain.

* Only available in selected models.

BFI 670 specifications

The Hotpoint BFI 670 represents a perfect blend of functionality and cutting-edge technology in the realm of built-in freezers. This appliance is designed to cater to the modern kitchen with efficiency, style, and superior performance. Standing out in the lineup of Hotpoint products, the BFI 670 combines ample storage space with innovative features, making it a valuable addition for any household.

One of the main features of the Hotpoint BFI 670 is its generous capacity, which provides ample space for all your frozen goods. With a net capacity of approximately 230 liters, it offers a practical solution for families who need to store large quantities of food. The adjustable shelves and drawers allow for easy organization, ensuring that everything can be stored in an accessible manner.

The BFI 670 is equipped with advanced freezing technologies that enhance its efficiency. One such feature is the Fast Freeze function, which enables users to freeze fresh food quickly, locking in nutrients and flavor while preventing the degradation of previously frozen items. This technology is particularly useful when storing food for extended periods, maintaining optimum quality and freshness.

Temperature control is another area where the BFI 670 excels. With precise temperature regulation, the appliance ensures that your frozen items remain at an ideal temperature. Moreover, the No Frost technology eliminates the need for manual defrosting by circulating cold air evenly throughout the freezer. This not only saves time but also prevents ice build-up, optimizing storage space.

Energy efficiency is a priority in the design of the Hotpoint BFI 670, achieving an impressive rating that helps reduce electricity bills while being eco-friendly. Consumers can rely on this appliance to be energy-conscious without compromising on performance. The appliance also features LED lighting, illuminating the interior and making it easier to find items even during late-night snacks.

In terms of design, the Hotpoint BFI 670 showcases a sleek, modern aesthetic that complements any kitchen decor. Its integrated design allows for a seamless look, making it an unobtrusive yet functional choice.

Safety features are also integrated into the BFI 670. It comes with an audible alarm that alerts users if the door is left open, preventing temperature rises that could lead to food spoilage. Furthermore, the appliance is designed with a child lock to ensure that it remains secure and safe for families with young children.

In conclusion, the Hotpoint BFI 670 is an advanced built-in freezer that provides ample storage, innovative freezing technologies, energy efficiency, and safety features. Its stylish design and practical functionality make it an excellent choice for those looking to enhance their kitchen experience.