Before using your MultiBlender Platinum
Important: Always ensure your blender is unplugged from the power outlet before fitting or removing the blade assembly. Always handle the blade assembly with caution, as the blades are extremely sharp.
To assemble the six-blade system in the glass jug (see Figure 1).
1.Place the silicone rubber seal over the six- blade assembly, as shown in figure 1.
2.Place the
Figure 1 |
|
| |
Silicone |
| ||
assembly |
| ||
seal | Figure 2 | ||
| |||
|
| ||
|
| Note: The blender jug will leak if the six- | |
|
| blade system is not assembled correctly. | |
|
| Note: Do not attempt to remove the | |
|
| stainless steel blades from the blade | |
|
| assembly. | |
|
| 3. Plug the power cord into a | |
|
| power outlet and turn the power ‘ON’. |
5