Using your MultiBlender Platinum

1.Place the blender jug onto the motor base.

Note: Do not switch ‘ON’ the MultiBlender Platinum without the lid in position.

2.Place ingredients into the glass jug. Do not exceed the maximum indicated level – 1.5 litres.

3.Position the lid with ingredient cup onto the blender jug. Ensure the lid is firmly in place.

4.Using the selector dial, select the desired blending speed 1, 2, 3 or PULSE.

Settings 1, 2, 3 will provide continuous blending until the dial is turned to the ‘O’ position.

The Blending Guide on page 8 shows the functions that can be performed and the suggested speeds to use.

Note: Although the lid fits firmly to the glass jug, we advise when blending liquid ingredients, to place your hand on the lid as you initially select the blending speed/function. As the powerfull 650 watt motor could cause the liquid to surge up causing leakage. Once you have started blending you can remove your hand.

Note: Do not operated for more than 2 minutes at a time.

Further ingredients can also be added whilst blending by removing the ingredient cup and pouring ingredients through the hole in the lid.

5.After you have completed blending, turn the control dial to the ‘0’ position.

Note: When removing the six-blade assembly from the glass jug you may need to slightly tilt the blade so that it slides out easily. You shouldn’t force the blades out of the glass jug as this will ultimately damage the blades.