MULTITASKER
7.4 MENU MODE
Menu Mode commands allow virtually the same functionality as programming commands. Unlike the programming commands in the previous sections, menu commands prompt the user to select from a list of available options. The system then responds based upon selections made by the user.
7.4.1 MENU COMMAND DEFINITIONS
Refer to section 7.2 for details on card functions and examples. Following is a
MENU | COMMAND |
Equalization | [EQ] |
Gain | [GAIN] |
Save | [CnS] |
Reset | [CLR] |
|
|
Version | [VER] |
|
|
Status | [C] |
|
|
Help | [HELP] |
7.4.2 USING MENU MODE
Do NOT press any keys except those relating to the current menu. If you press the ENTER key after entering a letter or digit, the original list of systems will be displayed.
1.In order to enter Menu Mode, the system needs to be connected to a computer running
2.In the Terminal Window, press the ENTER key on the keyboard.
3.The system checks all MultiTaskers on the
Example: 1: U1
2:U2
3:U3
4.Enter the ID number of the desired system. In the example above, enter a “1” for the MultiTasker with unit ID 1.
5.The system then interrogates all the cards available in its enclosure and displays a list of available cards.
Example: 01:
02:
04:MT115-111
6.Enter the
7.The system will prompt for selections specific to the selected card.
8.Read each menu carefully, and continue selecting keys as prompted.
NOTE: Menus for data entry have two
prompts: “Key=” and “ESC” (escape). Press the escape key to return to the previous menu.
7.4.3 MENU TYPES
1.MAIN MENU
The first menu displayed after selecting the card is the Main Menu. This menu provides access to the key functions related to the card. Press the key representing the menu item for access and a
2.
Each menu item will display either a
17 |
