MULTITASKER
8.3 NO DISPLAY
Cause 1: The source has a problem.
Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no display, see Cause 2.
Cause 2: Signal is bad or missing.
Solution 1: Make sure the input is connected to the TP transmitter. If there is still no display, see Solution 2.
Solution 2: Bypass the
Cause 3: Cable connections are incorrect.
Solution: Make sure the cables are properly connected. Also, make sure that the continuity and wiring are good. If there is still no display present, see Cause 4.
Cause 4: The display has a problem.
Solution: Make sure the display is powered applied and turned on. If there is still no display, please call ALTINEX at (714)
ALTINEX POLICIES | 9 |
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
9.2CONTACT INFORMATION ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714
TOLL FREE:
WEB: www.altinex.com
E-MAIL: solutions@altinex.com
20 |