![24.[RMG]](/images/new-backgrounds/26677/2667733x1.webp)
MULTITASKER
24.[RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from
Example:
Remove all cards from G52 by sending [RMG5]. The system will return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively deleting all groups, by sending [RMG*]. The system will return the following feedback:
25.[RD]
This command reads and then displays the members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from
Example:
C2, C4, and C6 make up G5. Read the member data for G5 by sending the command [RDG5]. The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that make up G5. In this case, G5 includes C2, C4, and C6.
7.3SUMMARY OF COMMANDS Basic Commands
1) | [VER] | Display firmware version |
2) | [C] | Display card status |
3) | [CnS] | Save card settings |
4) | [..S] | Save current setting |
5) | [CLR] | Reset card to defaults |
6) | [TEST] | Test internal memory ICs |
7) | [HELP] | Display available commands |
Feedback Commands | ||
8) | [FBD] | Feedback delay on/off |
9) | [?] | Display system cards |
10) | [?C] | Display card information |
11) | [STA1] | |
12) | [STA0] | |
Card Commands | ||
13) | [EQ] | Select equalization adjustment |
14) | [EQ=] | Set equalization level |
15) | [GAIN] | Select video gain adjustment |
16) | [GAIN=] | Set video gain level |
ID Commands |
| |
17) | [RSI] | Reset Card IDs to defaults |
18) | [SIDn] | Set all Card IDs |
19) | [SIDnCi] | Set one Card ID |
20) | [SID+] | Set all Card IDs to an offset |
21) | [RSN] | Display card slot number |
Group Commands | ||
22) | [WR] | Add card(s) to a group |
23) | [RMC] | Remove card(s) from group |
24) | [RMG] | Delete group |
25) | [RD] | Display group members |
16 |
