Denon ADV-M51 Setting UP the System, System setup items, System Setup button, Cursor buttons

ENGLISH

10SETTING UP THE SYSTEM

(1) System setup items

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 10 to 17), make the various settings described below on the monitor screen using the ADV-M51’s on-screen display function.

•Use the following buttons to set up the system:

6	7		-
	STATUS
3			MUTING
SETUP			TONE /SDB
	ENTER
CH SELECT				SURROUND
				PARAMETER
		- VCR CH		+
RETURN	DISPLAY	MENU	TOP MENU
ANGLE	AUDIO		SUB TITLE

SYSTEM SETUP button

Press this to display the system setup menu.

CURSOR buttons

1and 0:Use these to move the cursors (1 and 0) to the left and right on the screen.

•and ª: Use these to move the cursors (• and ª) to the up and down on the screen.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

System setup items and default values (set upon shipment from the factory)

		Setup				Default settings
	Quick set up	Set the screen size and the speaker system.		TV Aspect						Speaker
				4:3 PS				2CH Virtual & SW
		Input the combination of speakers in your system and		Front Sp.					Sub Woofer
		their corresponding sizes (SMALL for regular speakers,
	Speaker Configuration	LARGE for full-size, full-range) to automatically set the		Small						Yes
		composition of the signals output from the speakers and the
		frequency response.			Sw Freq. = 150 Hz / SW mode = None
	Delay Time	This parameter is for optimizing the timing with which the		Front					Subwoofer
Setup		audio signals are produced from the speakers and subwoofer
		according to the listening position.		9ft (2.7m)						9ft (2.7m)
		At the listening position, listen to the test tones output	Front L			Front R			Sub Woofer
System	Channel Level
		from the different speakers and set so that the playback
		level from the different speakers is equal.	0 dB			0 dB				0 dB
	DVD auto power off setting	The power automatically switches to standby if no
		operation is performed for 30 minutes while in the stop			power does not turn off automatically
		mode with the function set to DVD.
	Function Setting	Set the LINE-1 and LINE-2 function names and turn the	LINE-1				LINE-2				REC OUT
		analog recording output (REC OUT) on or off.	MD				TAPE				ON
	Disc Setup	Set the audio language, subtitle language and disc menu	Dialog				Subtitle				Disc Menu
		language for when playing discs.	English				OFF				English
	OSD Setup	Set the wallpaper for the setup and operation screens.					Wall Paper
							Blue
	Video Setup	Set the screen size and video system for the TV being used.	TV Aspect		TV Type			Video Mode			Black level
Setup
			4 : 3 PS			NTSC		AUTO			LIGHTER
DVD	Audio Setup	Set the digital audio signal format and the linear PCM		Digital Out					LPCM Select
		sampling frequency and bit conversion.		Normal						OFF
	Ratings	Make the playback restriction setting for DVDs with	Rating Level					Pass Word Change
		restricted viewing and set the password required for
		changing the setting.		No Limit					0000 (Default)
	Other Setup	Make the closed caption setting for DVDs. (A commercially	Closed Caption						Slide Show
		available decoder is required to display the closed captions.)		OFF						5SEC

31