Denon ADV-M51 manual TV screen size setting, Speaker system settings, 2CH Virtual & SW

4	Press the ENTER button to display the
	menu’s setting screen.	ENTER
	On the setting screen, the selected
	item is displayed in yellow and the
	values of the other items are
	displayed in green.	Remote control unit

[1] TV screen size setting

ENGLISH

7 Use the • and ª cursor buttons to

select the speaker system to be used.

Remote control unit

QUICK SETUP MENU DENON

SELECT YOUR TV SYSTEM
4 : 3	PAN & SCAN
4 : 3	LETTER	BOX
16 : 9	WIDE

4 : 3 TELEVISION

SELECT THIS TO PLAY WIDE DVDs

IN THE PAN & SCAN MODE.

(WITH THE SIDES OF THE PICTURE CUT OFF)

8	Press the ENTER button to set the
	selected setting.
	• The setup screen in step 2 reappears.
	/The setup mode is quit in step 9.
	The setup mode can also be quit by
	using the • and ª cursor buttons at
	the setup screen to select “EXIT
	SETUP” then pressing the ENTER
	button.

ENTER

Remote control unit

SELECT : DECISION : ENTER BUTTON

•The currently set value is displayed in yellow.

5	Use the • and ª cursor buttons to
	select the desired TV screen size and
	display type.
	The selected TV screen size is
	displayed in yellow and the
	description is displayed in green.

Remote control unit

QUICK SETUP MENU		DENON
SELECT YOUR TV SYSTEM
4 : 3	PAN & SCAN
4 : 3	LETTER	BOX
16 : 9	WIDE

16 : 9 WIDE TELEVISION

SELECT THIS TO PLAY WIDE DVDs

IN THE FULL-SCREEN MODE.

SELECT : DECISION : ENTER BUTTON

6	Press the ENTER button to set the
	selected setting.		ENTER
	•	The screen shown below appears.
	[2] Speaker system settings		Remote control unit
		QUICK SETUP MENU DENON
		SELECT TOUR SPEAKER SYSTEM
		EXIT
		2CH VIRTUAL
		2CH VIRTUAL&SW

FRONT SMALL

SUBWOOFER YES

SELECT : DECISION : ENTER BUTTON

•“Return” is displayed in yellow.

•The currently set value is displayed in green.

•If you do not want to change the setting, press the ENTER button at “Return”. The screen in step 2 reappears.

•To change the setting, proceed to step 7 below.

9	Press the SETUP button to quit the
	setup mode.	SETUP
	The setup mode can also be quit by
	using use the •and ªcursor buttons
	at the setup screen to select “EXIT
	SETUP” then pressing the ENTER Remote control unit
	button.

About the speaker system settings

B2CH VIRTUAL

Select this when only using with the two speakers for the front channels.

B2CH VIRTUAL & SW

Select this when using two speakers for the front channels and a subwoofer with built-in amplifier.

• Settings

Front	:	Small
Subwoofer	:	Yes
Subwoofer frequency	:	150 Hz

Set the front speakers and subwoofer at equal distances.

NOTE:

•The speaker system is set to “2CH VIRTUAL & SW” upon shipment from the factory. It is not possible to achieve the normal bass sound using this setting but with only speakers for the two front channels. If only using speakers for the two front channels, change the setting to “2CH VIRTUAL”.

33