How to Assemble the Mixer
IMPORTANT: To remove or insert the Bowl or Attachments, the Mixer Head must be raised and locked in the UP position.
To Attach the Bowl
1. Make sure that Setting Control is set to OFF and the Mixer is unplugged.
2. Press the Mixer Release Button and tilt the Mixer Head up.
3. Place Bowl on bowl lock and turn clockwise until Bowl is locked.
4. Plug Mixer into electrical outlet.
To Remove:
1. Make sure that Setting Control is set to OFF and the Mixer is unplugged.
2. Press the Mixer Release Button and tilt the Mixer Head up.
3. Turn Bowl counterclockwise to unlock.
To Attach the Beater, Wire Whisk, or Dough Hook
wWARNING
Injury Hazard
Unplug mixer before inserting or removing beaters.
Unplug mixer before cleaning. Failure to do so can result in broken bones or cuts.
1. Make sure that the Setting Control is set to OFF and the Mixer is unplugged.
2. Press the Mixer Release Button and tilt the Mixer Head up.
3. Insert Attachment onto Beater Shaft and press upward as far as possible.
4. Turn the Attachment to the right, hooking beater over pin on shaft.
5. Plug Mixer into electrical outlet.
4