Audio input preparation
When connecting a microphone to the MIC IN jack
1 Connect the microphone’s connecting cable to the MIC IN jack on the camera.
When connecting a microphone to the AUDIO IN connector
1 Connect the microphone’s connecting cable to the AUDIO IN connector on the camera.
Two microphones can be connected to the CH1 and CH2 connectors.
MIC IN jack
2 Set the AUDIO IN switch or switches to “FRONT” in accordance with the audio channel or channels whose sound is to be recorded.
AUDIO IN switches
<Note>
When extending the microphone’s connecting cable, use a cable which supports the phantom power supply system.
AUDIO IN connectors
2 Set the AUDIO IN switch or switches for the channel or channels to which the microphone or microphones have been connected to “REAR.”
AUDIO IN switches
<Note>
When the LINE/MIC/+48V selector switch is set to “+48V,” the phantom power supply system is supported.
37 (E)
