Mounting the unit on a tripod
Use the tripod attachment available as an optional accessory for mounting the unit onto a tripod.
1 Attach the tripod attachment to the tripod.
<Note>
Select the attachment holes that best support the centre of gravity of the unit and tripod attachment. Check that the diameters of the selected holes match the diameters of the pan head.
Tripod attachment
Pan head
2 Attach the camera to the tripod attachment.
Slide the camera toward the front along the grooves until it clicks into place.
Detaching the unit from the tripod attachment While pressing the red lever, move the black lever in the direction of the arrow, slide the unit toward the rear, and detach it.
Tripod attachment
Red lever | Black lever |
<Note>
If the pins in the tripod attachment fail to return to their original positions after the camera has been detached, press the red lever again and at the same time move the black lever in the direction of the arrow: this will return the pins to their original positions.
Bear in mind that the camera cannot be attached while the pins are left in the centre.
