Viewfinder screen status displays
Display modes and setting change messages
The display of messages advising the user of what changes have been made to the settings and what the adjustment results are can be turned off for some or all of the items displayed.
Setting change/adjustment result messages and display modes
|
| Display mode | ||||
Situation in which message is displayed | Message |
| setting |
| ||
|
| 1 |
| 2 |
| 3 |
|
|
|
|
|
|
|
When the filter selection has been changed | Filter: n (n=1, 2, 3, 4), m (m=A, B, C, D) | t |
| t |
| ± |
|
|
|
|
|
|
|
When the gain setting has been changed | GAIN: n dB | t |
| t |
| ± |
| (n= |
|
|
|
|
|
|
|
|
|
|
|
|
When the WHITE BAL switch setting has been | WHITE: n (n=ACH, BCH, PRESET) | t |
| t |
| ± |
changed |
|
|
|
|
|
|
|
|
|
|
|
|
|
When the OUTPUT/AUTO KNEE switch has | AUTO KNEE: ON (or OFF) | t |
| ± |
| ± |
been set to AUTO KNEE or OFF |
|
|
|
|
|
|
<Note> |
|
|
|
|
|
|
This display is shown for about 3 seconds |
|
|
|
|
|
|
immediately after the unit’s power has been |
|
|
|
|
|
|
switched on. |
|
|
|
|
|
|
|
|
|
|
|
|
|
When the shutter speed/mode setting has been | SS: 1/100 (or 1/120, 1/250, 1/500, 1/1000, 1/2000, | t |
| ± |
| ± |
changed | S.SCAN, 3.0d to 350.0d, 0.8% to 97.2%) |
|
|
|
|
|
|
|
|
|
|
|
|
When the white balance (AWB) has been | Example) AWB: OK | t |
| ± |
| ± |
adjusted | For details, refer to “Adjusting the white balance” |
|
|
|
|
|
| (pages 53 to 56). |
|
|
|
|
|
|
|
|
|
|
|
|
When the black balance (ABB) has been | Example) ABB: OK | t |
| ± |
| ± |
adjusted | For details, refer to “Adjusting the black balance” |
|
|
|
|
|
| (page 57). |
|
|
|
|
|
|
|
|
|
|
|
|
<Note>
The message displays also depend on the status of other menu settings. For instance, even when “1 (no display)” is set as the filter selection, the filter selection will be displayed when FILTER is set to “ON” on the VF INDICATOR screen.
±: Message is to be displayed. t : Message is not to be
displayed.
