Panasonic AJ-HDC27FE 3, 5, 7, 6, 8

76 (E)
Saving the data settings on the
card
Select the file No.
Give a title to the selected file.
Setup card operations
1Perform the menu operations (pages 86 to 88),
and display the “CAM CARD READ/WRITE”
screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
4Turn the JOG dial button to move the arrow
(cursor) to the “TITLE : ” item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
nTITLE:
1: 5:
2: 6:
3: 7:
4: 8:
2Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes avove
WRITE, and press the JOG dial button.
3Turn the JOG dial button to select a number from 1
to 8, and press the JOG dial button.
5When the JOG dial button is pressed, the arrow
(cursor) moves to the title input area, and the input
mode is established.
6Press the JOG dial button again and turn it until the
character to be set is displayed.
When the button is turned, the character displayed
is switched in the following sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ’, >, <, /, –
8Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps 6and 7to set the characters (maximum of
8).
7Press the JOG dial button to enter the character.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
m
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
< CAM CARD READ/WRITE >
SELECT :1
READ
nSELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8: