Viewfinder lamp displays
1
TALLY / REC
|
| BATT |
|
|
| |
|
|
|
| VTR | Viewfinder pictured here is the | |
|
|
|
| |||
|
|
|
| SAVE | ||
|
|
|
|
|
| (For details concerning the viewfinder, refer to |
|
|
|
|
|
| |
3 | 2 | 4 | the operating instructions of the viewfinder.) | |||
1TALLY/REC (recording) lamp
This lights up (red) during recording. It flashes when a problem has occurred.
For details, refer to the section on the “Warning system” (pages 124, 125).
2BATT (battery) lamp
This starts flashing when the battery voltage has dropped to the level where the battery will no longer be usable in several minutes’ time, and it lights when the battery is no longer usable. To prevent operation from being interrupted, replace the battery before the battery has discharged completely.
For details, refer to the section on the “Warning system” (pages 124, 125).
3 
(abnormal operating status warning) lamp This lights when the unit is set to an abnormal operating status for any of the items set to “ON” on the “!LED” screen of the setting menu.
For details on selecting the items targeted for the
lamp display, refer to the section on “Setting the 
lamp displays” (next page).
4VTR SAVE (VTR power-saving) lamp
This lights when the VTR SAVE/STBY switch is set to SAVE. It goes off during recording.
<Note>
In the rec pause mode, the SAVE mode is established automatically, and the lamp lights after the time set for the pause timer (temporary stop time) has elapsed.
After two minutes in the play pause mode, the SAVE mode is established automatically, and the lamp lights.
