Panasonic AJ-HDC27FE operating instructions Skin Tone DTL screen, KNEE/LEVEL screen, 98 E

Setting menu screens FILM (CAM) MAIN MENU 1

SKIN TONE DTL screen

The skin tone detail of the camera is set on this screen.

Item	Variable	VF	Remarks
	range	display
SKIN TONE DTL	ON	USER	For setting the skin tone
	OFF	ENG	detail to ON or OFF.
SKIN TONE	ON	USER	For setting zebra in the
ZEBRA	OFF	ENG	skin tone range to ON or
			OFF.
			At the “ON” setting, the
			amount of detail in the
			zebra viewing range is
			varied.
SKIN DTL	0	USER	For setting detail signal
CORING	:	ENG	noise removal level.
	5
	:
	7
Y MAX	0	ENG	For setting the maximum
	:		luminance level at which
	190		the detail is boosted.
	:
	255
Y MIN	0	ENG	For setting the minimum
	:		luminance level at which
	10		the detail is boosted.
	:
	255
I CENTER	0	ENG	For setting the medium I-
	:		axis level at which the
	55		detail is boosted.
	:
	255
I WIDTH	0	ENG	For setting the minimum I-
	:		axis level at which the
	90		detail is boosted.
	:
	255
Q WIDTH	0	ENG	For setting the maximum
	:		Q-axis level at which the
	10		detail is boosted.
	:
	255
Q PHASE	–31	ENG	For setting the minimum
	:		Q-axis level at which the
	0		detail is boosted.
	:
	+31

The underlining in the variable range column indicates the setting in the preset mode.

KNEE/LEVEL screen

The knee settings of the camera are performed on this screen.

Item	Variable	VF	Remarks
	range	display
MASTER PED	–200	USER	For setting the master
	:	ENG	pedestal level (MASTER
(FILM MENU)	0		PED).
	:
(CAM MENU)	+018
	:
	+200
MANUAL KNEE	ON	USER	For setting the mode when
	OFF	ENG	the AUTO KNEE switch is
			at OFF.
KNEE POINT	30%	USER	For setting the manual
(FILM MENU)	:	ENG	knee point position.
	65%		<Note>
	:		This setting is cancelled
	90%		when FILM REC has been
(CAM MENU)	80%		selected as the CINE
			GAMMA SEL item setting
	:
			on the GAMMA screen.
	95%
	:
	107%
KNEE SLOPE	150%	USER	For setting the manual
(FILM MENU)	:	ENG	knee slope.
	500%		<Note>
	:		This setting is cancelled
	600%		when FILM REC has been
(CAM MENU)	0		selected as the CINE
			GAMMA SEL item setting
	:
			on the GAMMA screen.
	50
	:
	99
WHITE CLIP	ON	USER	For setting white clipping
	OFF	ENG	to ON or OFF.
WHITE CLIP LVL	90%	USER	For setting the white
	:	ENG	clipping level.
	109%
A. KNEE POINT	80%	USER	For setting the auto knee
	:	ENG	point position.
(CAM MENU)	95%
	:
(FILM MENU)	100%
	:
	107%
A. KNEE LVL	100	USER	For setting the maximum
	:	ENG	auto knee level.
	108
	109
A. KNEE	1	USER	For setting the AUTO
RESPONSE	2	ENG	KNEE response rate.
	3
	4

<Note>

The gamma characteristics are set using the KNEE POINT and KNEE SLOPE items when VIDEO REC was selected as the CINE GAMMA SEL item setting on the GAMMA screen.

98 (E)