How to use the scene file
The contents of the setting menus can be saved in the scene file area of the camera’s memory, and they can be loaded from this area.
Four scene files are provided in the unit.
Use of this data speeds up the process of reproducing suitable setup statuses.
Scene file operation
Menus are used to save the setting menu contents in the scene file area of the camera’s memory and load them from this area.
Saving the scene file
1 Perform the menu operations (pages 86 to 88), and display the “INITIALIZE” screen of FILM (CAM) MAIN MENU 4.
n< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
2 Turn the JOG dial button to move the arrow (cursor) to the SCENE SEL item.
3 When the JOG dial button is pressed, the scene file number starts flashing. Turn the JOG dial button to select the scene file in which data is to be saved.
< INITIALIZE > |
|
READ FACTORY DATA |
|
WRITE USER DATA |
|
n SCENE SEL | :1 |
READ
WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
4 Press the JOG dial button to enter the scene file.
5 Turn the JOG dial button to move the arrow (cursor) to the TITLE1, TITLE2, TITLE3 or TITLE4 item that corresponds to the scene file whose title is to be provided.
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
nTITLE1:
TITLE2:
TITLE3:
TITLE4:
6 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
m TITLE1:
TITLE2:
TITLE3:
TITLE4:
7 Press the JOG dial button again and turn it until the character to be set is displayed.
When the button is turned, the character displayed is switched in the following sequence:
Space: )
7
letters:
7
numbers:
7
symbols: ’, >, <, /, –
8 Press the JOG dial button to enter the character.
9 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 7 and 8 to set the characters (maximum of 8).
