Film tone gamma function
The unit incorporates a total of three gamma curves— two cine curves (for films/for videos) and the conventional video gamma
Switching from the film mode to video mode or vice versa can be accomplished using the CAM MENU SEL item on the OPTION screen of FILM (CAM) MAIN MENU 4.
Two gamma curves (for films/for videos) are available in the film mode. They can be set by selecting the CINE GAMMA SEL item on the GAMMA screen of
FILM MAIN MENU 1.
Video mode (VIDEO MENU)
This is the optimum mode for playing back the images recorded on tape using a video component. The images are processed using the conventional video gamma characteristics.
Film mode (FILM MENU)
Two types of
FILM REC (for films: film gamma)
This is the optimum mode for printing the images recorded on tape onto film and presenting them. The images are processed using the
VIDEO REC (for videos: film tone gamma)
Even when playing back images recorded on tape using a video component, this mode provides a wide dynamic range, enabling images to be played back in a mode where the images are more like film images than the conventional video images.
The images are processed using the
The menu settings performed in the film mode and video mode are saved separately.
Switching the frame frequency
This unit allows the frame frequency to be switched to
60.00Hz or 59.94 Hz to provide support in areas with different video systems. The frame frequency can be switched on the OPTION screen of FILM (CAM) MAIN MENU 4.
1 Perform the menu operations (pages 86 to 88), and open the OPTION screen.
n< OPTION > |
|
ENG SECURITY | :OFF |
SHD,ABB SW CTRL :ON | |
AWB AREA | :50% |
AWB & ABB OFFSET:OFF | |
CAM MENU SEL | :FILM MENU |
SYSTEM FREQ. | :60.00Hz |
2 Turn the JOG dial button to move the arrow (cursor) to the SYSTEM FREQ item.
3 Press the JOG dial button to set the item to be used.
Turn it to select the frequency, and then press it to enter the selection.
At this time, the TURN OFF POWER message flashes on the display.
4 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.
5 Set the POWER switch to OFF to turn off the power.
The frame frequency will be switched when it is turned back on.
Press the MODE CHECK button to check that the frame frequency has been switched.
61 (E)
