Screen displays
Remaining battery charge and audio channel level and remaining tape displays
Remaining tape display
The remaining tape time is displayed using 7 segments. The remaining tape time indicated by each segment is set
Displays relating to time codes
These displays light for the time code, CTL and actual
time |
|
DF | : Drop frame mode |
SLAVE : External locking of the time code | |
HOLD | : Time code generator in the hold mode (when the |
| HOLD button has been pressed) |
to 3 minutes or 5 minutes using TAPE REMAIN/ $ on the VTR MENU “BATTERY/TAPE” screen. Each time the number of minutes set for the segments elapses, one segment is cleared. (See page 116)
DF SLAVE TCG HOLD | EMPHASIS | |||
|
|
|
| 0 |
h | min | s | frm | 10 |
| ||||
TAPE |
|
|
| 20 |
| E |
|
| F |
|
|
|
| 30 |
DF SLAVE TCG HOLD
h min s frm
TAPE
EF
BATT
RF SERVO HUMID SLACK
EMPHASIS
0
10
20
30
40
CH1
BATT |
40 |
RF SERVO HUMID SLACK CH1 |
Remaining battery charge display
If a battery with a digital display (% display) is used, all 7 segments up to the “F” position light when the 70% or more of the battery charge remains.
When there is less than 70% of the battery charge remaining, the segments go out one by one in sequence every time the remaining charge drops by 10%.
Audio channel level meter
Displays relating to errors and warnings
Time counter display
This displays the time code, CTL, user’s bit and actual time. For the correlation between the items displayed and the switches, refer to the next section.
Time code-related switch settings and display items
TCG switch | DISPLAY switch | Display item | |
position | position | ||
| |||
|
|
| |
| TC or CTL | Time code | |
SET |
|
| |
UB | User’s bit | ||
| |||
|
|
| |
| CTL | CTL |
Error code display
DF SLAVE TCG HOLD
h min s frm
TAPE
EF
BATT
RF SERVO HUMID SLACK
EMPHASIS
0
10
20
30
40
CH1
TC | Time code | |
|
|
|
| UB | User’s bit |
<Note>
If the HOLD button is pressed while the DISPLAY switch is set to UB, “HOLD” on the counter display will flash for as long as the switch is held down, and the VITC user’s bit information recorded in the video AUX area will appear on the counter display.
Warning displays
RF | : Clogged video head |
SERVO: Servo disturbance
HUMID : Formation of condensation on the head drum
SLACK: Problem in tape
For details, refer to “Warning system” (pages 124 and 125).
51 (E)