Panasonic AJ-HDC27FE When using a wireless microphone, When connecting audio components, 38 E

Audio input preparation

When using a wireless microphone

Attach the WX-RJ700 wireless receiver when Panasonic’s wireless system is to be used.

1 Attach the WX-RJ700 wireless receiver to the WX- ZJ770 camera attachment.

2 Align the grooves in the camera attachment with the pins on the battery case, etc. to attach the wireless receiver.

Audio output connectors

WX-RJ700 wireless receiver

When connecting audio components

1 Connect the AUDIO IN connectors on the camera with the audio component using the XLR cable.

AUDIO IN connectors

2 Set the AUDIO IN switch or switches for the channel or channels to which the audio component has been connected to “REAR.”

AUDIO IN switches

WX-ZJ770 camera attachment

XLR cable

AUDIO IN connectors

3 Set the LINE/MIC/+48V selector switch on the rear panel to “LINE.”

3 Connect the AUDIO IN connectors on the camera with the wireless receiver using the XLR cable.

4 Set the AUDIO IN switch or switches for the channel or channels to which the XLR cable has been connected to “REAR.”

5 Set the LINE/MIC/+48V selector switch on the rear panel to “MIC.”

When detaching the wireless receiver, push up the lever on the bottom panel of the camera attachment to disengage it.

<Note>

For details on the operations and other aspects of the WX-RJ700 wireless receiver, refer to the operating instructions which accompany the receiver.

LINE/MIC/+48V selector switch

AUDIO IN switches

38 (E)