Adjusting the white shading
Select the file No.
11 Turn the JOG dial button to move the arrow (cursor) to the SELECT item
12 Press the JOG dial button and the file number will flash. Turn the JOG dial button to select the file (1 to 8) to be recorded.
< WHITE SHADING > |
|
n SELECT | :1 |
READ |
|
DETECTION(V SAW) |
|
CORRECT | :ON |
TITLE:
1:5:
2:6:
3:7:
4:8:
13 Press the JOG dial button to enter the file number.
Give a title to the selected file.
14 Turn the JOG dial button to move the arrow (cursor) to the “TITLE : ” item.
< WHITE SHADING > |
|
SELECT | :1 |
READ |
|
DETECTION(V SAW) |
|
CORRECT | :ON |
n TITLE: |
|
1:5:
2:6:
3:7:
4:8:
15 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.
< WHITE SHADING > |
|
SELECT | :1 |
READ |
|
DETECTION(V SAW) |
|
CORRECT | :ON |
m |
|
TITLE: |
|
1:5:
2:6:
3:7:
4:8:
16 Press the JOG dial button again and turn it until the character to be set is displayed.
When the button is turned, the character displayed is switched in the following sequence:
Space: ) 7
letters:
numbers:
7
symbols: ’, >, <, /,
17 Press the JOG dial button to enter the character.
18 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 16 and 17 to set the characters (maximum of 12).
19 When the title has been input, turn the JOG dial button to move the arrow (cursor) to the “:” position.
< WHITE SHADING > |
|
SELECT | :1 |
READ |
|
DETECTION(V SAW) |
|
CORRECT | :ON |
m TITLE:222222222222
1:5:
2:6:
3:7:
4:8:
20 When the JOG dial button is pressed, the arrow (cursor) returns to the TITLE: item.
< WHITE SHADING > |
|
SELECT | :1 |
READ |
|
DETECTION(V SAW) |
|
CORRECT | :ON |
nTITLE:222222222222
1:5:
2:6:
3:7:
4:8:
