Panasonic AJ-HDC27FE operating instructions 118 E, Always, Chsel, Mix

Setting menu screens VTR MAIN MENU

MIC/AUDIO screen

Item	Variable	VF		Remarks
	range	display
MIC LOWCUT	FRONT	USER	For setting the high-pass
CH2	REAR	ENG	filter for the CH2 mic input.
	F&R		FRONT: The high-pass filter
	OFF			for the front mic
				input is set to ON.
			REAR : The high-pass filter
				for the rear mic
				input is set to ON.
			F&R	: The high-pass
				filters for both the
				front and rear mic
				inputs are set to
				ON.
			OFF	: The high-pass filter
				for the CH2 input
				is set to OFF.
LIMITER	ON	USER	For switching the audio
	OFF	ENG	limiter to ON or OFF.
			ON	: The limiter operates.
			OFF : The limiter does not
				operate.
TEST TONE	NORMAL	USER	NORMAL:
	ALWAYS	ENG	The test tone signal is
	OFF		output when the AUDIO
	CHSEL		IN switch for CH1 is set
			to front while BAR is
			selected as the
			CAM/BAR switch setting.
			ALWAYS:
			The test tone signal is
			always output when BAR
			is selected as the
			CAM/BAR switch setting.
			OFF:
			The test tone signal is
			not output.
			CHSEL:
			The test tone signal is
			output for the selected
			channel when the
			AUDIO IN switch CH1 or
			CH2 is set to front while
			BAR is selected as the
			CAM/BAR switch setting.

<Note>

The frequency characteristics in the MIC LOWCUT ON mode are 200 Hz to 10 kHz.

Item	Variable	VF	Remarks
	range	display
REC CH3/CH4	CH1/2	USER	For setting the audio
	CH3/4	ENG	signals to be recorded on
			the CH3 track and CH4
			track.
			CH1/2:
			The CH1 signal is
			recorded on the CH3
			track, and the CH2
			signal is recorded on the
			CH4 track.
			CH3/4:
			The CH3 and CH4
			signals which are
			supplied from the
			camera adapter are
			recorded.
CUE SELECT	SIDE SW	USER	For setting the audio
	CH1	ENG	signals to be recorded on
	CH2		the cue track.
	MIX		SIDE SW:
			The signals selected by
			the CUE switch on the
			side panel are recorded.
			CH1:
			The CH1 signals are
			recorded.
			CH2:
			The CH2 signals are
			recorded.
			MIX:
			The CH1 and CH2
			mixed signals are
			recorded.
CUE REC	ON	USER	For setting whether
	OFF	ENG	signals are to be recorded
			on the cue track.
			ON : The signals will be
			recorded on the cue
			track.
			OFF : The signals will not
			be recorded on the
			cue track.
			The power-saving
			mode is established.
EMBEDDED	ON	USER	For setting whether the
AUDIO (60 Hz)	OFF	ENG	embedded audio signals
			are to be output to the HD
			SDI OUT connector when
			60.00 Hz has been
			selected as the frame
			frequency setting.
			ON : The embedded
			audio signals are
			output.
			OFF : The embedded
			audio signals are not
			output.

The underlining in the variable range column indicates the setting in the preset mode.

118 (E)