Panasonic AJ-HDC27FE operating instructions 105 E

Setting menu screens FILM (CAM) MAIN MENU 2

CAMERA SW MODE screen

Item	Variable	VF	Remarks
	range	display
USER1 SW		USER	For allocating the
(FILM MENU)	INH	ENG	functions in USER1 SW.
(CAM MENU)	S.GAIN		<Notes>
	S.IRIS		OWhen B.STR has been
	S.BLK		selected as this item’s
	B.STR		setting, the function for
	AUDIO CH1		setting the black level
	AUDIO CH2		gradation compensation
	REC SW		to +3 is allocated.
	Y GET		OWhen Y GET has been
	RET SW		selected as this item’s
			setting, the function for
			measuring the output
			luminance level is
			allocated.
			The output luminance
			level of the area near
			the centre marker in the
			viewfinder is displayed
			in percentage units in
			the middle of the
			viewfinder screen for
			approximately 3
			seconds.
USER2 SW		USER	For allocating the
(CAM MENU)	INH	ENG	functions in USER2 SW.
	S.GAIN		<Notes>
	S.IRIS		OWhen B.STR has been
	S.BLK		selected as this item’s
	B.STR		setting, the function for
	AUDIO CH1		setting the black level
	AUDIO CH2		gradation compensation
	REC SW		to +3 is allocated.
(FILM MENU)	Y GET		OWhen Y GET has been
	RET SW		selected as this item’s
			setting, the function for
			measuring the output
			luminance level is
			allocated.
			The output luminance
			level of the area near
			the centre marker in the
			viewfinder is displayed
			in percentage units in
			the middle of the
			viewfinder screen for
			approximately 3
			seconds.

The underlining in the variable range column indicates the setting in the preset mode.

Item	Variable	VF	Remarks
	range	display
S. BLK LVL	OFF	USER	For setting the super black
	–10	ENG	level.
	–20
	–30
ECU DATA	ON	USER	ON : The data controlled
SAVE	OFF	ENG	by the AJ-EC3
			extension control
			unit is stored in the
			memory.
			OFF : The data is not
			stored in the
			memory.
AUTO KNEE SW	ON	USER	For setting whether the
(FILM MENU)	OFF	ENG	AUTO KNEE function is to
			be made operational when
			the OUTPUT/AUTO KNEE
(CAM MENU)	ON		switch on the side panel
			has been set to the CAM
	OFF
			AUTO KNEE ON position.
			ON : The AUTO KNEE
			function is made
			operational.
			OFF : The AUTO KNEE
			function is not made
			operational.

105 (E)