Blender Safety

IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using electrical appliances, basic safety precautions should be followed, including the following:

1.Read the Operation Manual before using blender. Keep Operation Manual handy.

2.Plug into a grounded 3-prong outlet.

3.Do not remove ground prong.

4.Do not use an adapter.

5.Do not use an extension cord.

6.Disconnect power before cleaning or servicing.

7.To reduce risk of personal injury, unplug cord from outlet when not in use, and before putting on or taking off parts.

8.To protect against electrical shock, do not immerse cord, plug, or blender base in water or any other liquid.

9.Do not spray the base with a high-pressure spray gun.

10.Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

11.Do not use appliance for other than intended use.

12.Not intended for use by or near children.

13.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

14.To reduce risk of personal injury and to prevent damage to blender or container and cutter assembly, DO NOT insert utensils into blender container while operating blender.

15.Do not store any kitchen utensils in the container because the blender would be damaged if inadvertently turned on.

16.To prevent possibility of serious personal injury, keep hands out of blender container while operating blender. Always operate blender with container lid in place.

17.Avoid contacting moving parts.

18.Blades are sharp. Handle carefully.

19.If cutter assembly blades are loose, discontinue use immediately and replace cutter assembly. Do not attempt to repair or tighten cutter assembly.

20.Inspect container and cutter assembly daily. Do not use broken, chipped or cracked container. Check cutter for wear, nicks, or broken blades. Do not use broken or cracked cutting blades.

21.Do not use outdoors.

22.This appliance is intended for short periods of operation, with a rated operating time of 3 minutes.

23.Do not leave blender unattended while it is operating.

25.To prevent damage to blender, container, or cutter assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF, remove jar from base, remove jar cover, and use a thin rubber spatula to push mixture toward cutters.

25.When blending hot liquids, remove center-piece of two-piece lid. Hot liquids may push lid off jar during blending. To prevent possible burns: Do not fill blender jar beyond the 1 quart (1 liter) level. With the protection of an oven mitt or thick towel, place one hand on top of lid. Keep exposed skin away from lid. Start blending at lowest speed.

26.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Call the Technical Service number, 866-285-1087or 910-693-4277, for instructions on examination, repair, or electrical

or mechanical adjustment.

– SAVE THESE INSTRUCTIONS –

HBB250S, HBB250 specifications

The Hamilton Beach HBB250 and HBB250S are high-performance commercial blenders designed for busy kitchens and smoothie bars. Renowned for their durability and efficiency, these blenders are equipped to handle a variety of blending tasks, making them essential tools for professionals in the food and beverage industry.

One of the standout features of the HBB250 and HBB250S is their powerful motor. Both models boast a robust 1.6-horsepower motor, providing the necessary strength to crush ice and blend hard ingredients with ease. This ensures a smooth, consistent texture for smoothies, protein shakes, and other blended beverages.

The blenders are designed with a state-of-the-art blade system, featuring stainless steel blades that are specifically shaped to enhance blending performance. The blades can easily pulverize fruits, vegetables, and ice, delivering results in a fraction of the time compared to standard household blenders. This efficiency is critical in commercial settings, where speed and quality are paramount.

Control is another key aspect of the HBB250 and HBB250S. Both models feature simple, intuitive controls that make it easy for users to select their desired blending speed and duration. The HBB250 has a two-speed toggle switch, allowing for versatile blending options, while the HBB250S integrates a more advanced electronic interface with variable speed control and a pulse feature, providing users with more precision in their blending tasks.

The design of these blenders also emphasizes hygiene and safety. The HBB250 and HBB250S come with a removable jar, making it easy to clean after use. The jars are made from durable materials designed to withstand the rigors of commercial use, and their clear construction allows users to monitor the blending process easily.

Moreover, the HBB250 and HBB250S incorporate a patented Wave Action system, which is a technology that helps create a vortex that forces ingredients down toward the blades for thorough blending. This design minimizes the need for stopping the blender to scrape down ingredients, maximizing productivity.

In summary, the Hamilton Beach HBB250 and HBB250S are powerful, efficient, and user-friendly commercial blenders. Their combination of a powerful motor, advanced blade design, intuitive controls, and easy maintenance makes them ideal choices for anyone looking to enhance their beverage preparation in a professional kitchen environment. With these models, users can expect high performance and reliable consistency in every blend.