Denon AVR-1802/882 manual Features

Page 5

2 CAUTIONS ON INSTALLATION

Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV.

If this happens, take the following steps:

•Install this unit as far as possible from the tuner or TV.

•Set the antenna wires from the tuner or TV away from this unit’s power cord and input/output connection cords.

•Noise or disturbance tends to occur particularly when using indoor antennas or 300 Ω /ohms feeder wires. We recommend using outdoor antennas and 75 Ω /ohms coaxial cables.

For heat dispersal, leave at least 0.3 ft (10 cm) of space between the top, back and sides of this unit and the wall or other components.

ENGLISH

0.3 ft (10 cm) or more

B

0.3 ft (10 cm) or more

wall

3CAUTIONS ON HANDLING

•Switching the input function when input jacks are not connected

A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks.

•Muting of PRE OUT jack, HEADPHONE jack and SPEAKER terminals

The PRE OUT jack, HEADPHONE jack and SPEAKER terminals include a muting circuit. Because of this, the output signals are greatly reduced for several seconds after the power operation switch is turned on or input function, surround mode or any other set-up is changed.

If the volume is turned up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before adjusting the volume.

•Whenever the power operation switch is in the STANDBY state, the apparatus is still connected on some AC line voltages.

Please be sure to unplug the cord when you leave home for, say, a vacation.

4FEATURES

1.Dolby Pro Logic II decoder

Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround but also regular stereo sources into five channels (front left/right, center and surround left/right). In addition, various parameters can be set according to the type of source and the contents, so you can adjust the sound field with greater precision.

2.Dolby Digital decoder

Dolby Digital, a digital discrete system in which the different channels are completely independent, recreates “three- dimensional” sound fields (sounds with a sense of distance, movement and position) with no crosstalk between channels for greater reality. In addition, the 5 channels (excluding the 0.1 channel for low frequency effects) have a playback range extending to 20 kHz, the same as the range of CDs, thus resulting in clearer, more richly expressive sound.

3.DTS (Digital Theater Systems) decoder

DTS provides up to 5.1 channels of wide-range, high fidelity surround sound, from sources such as laser disc, DVD and specially-encoded music discs.

4.High performance DSP simulates 7 sound fields

Playback is possible in 7 surround modes: 5-channel Stereo, Mono Movie, Rock Arena, Jazz Club, Video Game, Matrix and Virtual. You can enjoy a variety of sound effects for different movie scenes and program sources even with stereo sources not in Dolby Surround.

5.Personal Memory Plus function

Personal Memory Plus is an advanced version of Personal Memory. With Personal Memory Plus, the set automatically memorizes the surround mode, channel volume, surround parameters, etc., for each of the separate input sources.

6.Remote control unit with pre-memory function

This unit comes with a remote control unit equipped with a pre- memory function. The remote control command codes for DENON remote controllable AV components as well as for DVD players, LD players, video decks, TVs, etc., of other major manufacturers are prestored in the memory.

7.6CH EXT. IN jack

This unit is equipped with 6CH EXT. IN jacks for use with audio formats of the future.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Nous vous remercions pour l’achat de cet appareil AVR-1802/882English Francais Safety Instructions Before Using Table of ContentsFeatures Front Panel Part Names and FunctionsSystem System SET UP Remote control unitRead this First Setting UP the Speaker SystemsFinally, setting up the system Connections Connecting the audio componentsLine Line OUT Front Subwoofer Center Surround Line OUTConnecting the video equipments Connecting a DVD player or a video disc player VDP Connecting a TV/DBS tunerConnecting a video decks Connecting the audio output jacksPrecaution when using S-jacks Connecting a video component equipped with S-video jacksConnecting a monitor TV Connecting the video decksFM antenna adapter assembly Connecting the antenna terminalsAM loop antenna assembly Connection of AM antennas Connecting banana plugs Connecting the speaker cordsPrecautions when connecting speakers Speaker system connectionsProtector circuit Inserting the batteries Using the Remote Control UnitRange of operation of the remote control unit Use the following buttons to set up the system Setting UP the SystemSystem Setup button Cursor buttons , ª, 0Press the System button to enter the setting Before setting up the systemSetting the speaker configuration Assignment of low frequency signal range Setting the Subwoofer ModeSubwoofer mode ParametersListening position Setting the delay timePreparations Terminal Digital input setupAfter setting up the system Preset memory Audio component Remote Control UnitOperating Denon audio components For tape deck TapePreset memory Video component For DVD player Operating a video component stored in the preset memoryFor video disc player VDP For video deck VCRRemote control unit to turn on the power Check that all connections are proper Turn on the powerOperation Before operatingTo select the input mode from the remote control unit To select the input mode from main unitInput mode selection function Playing the input sourceAfter starting playback Adjusting the sound quality toneDolby Digital DTSChecking the currently playing program source, etc Listening over headphonesTurning the sound off temporarily muting Mode AUTO, PCM, DTS or Analog button to switch to Playback using the external input EXT. in jacksSurround Adjust the level of the selected speakerBefore playing with the surround function Digital or DTS modesDolby PRO Logic Dolby Surround Pro Logic II modePanorama setting Cinema EQ settingDimension setting Center Width settingSelect the Dolby/DTS Surround mode Set the input mode to Auto or DTSPosition of the slide switch on Remote control unitUse left and right buttons to set the LFE level Use left and right buttons to set the D. COMP. InitialSurround parameters w Cinema EQ. Cinema Equalizer COMP. Dynamic Range CompressionDSP Surround Simulation Surround modes and their featuresVideo Game Personal Memory PlusUse Left Right buttons to set the effect level Initial DSP surround simulationUse Left Right buttons to set the room size Initial Use Left Right buttons to set the delay time Initial Delay 30msPress Surround Parameter When turned clockwiseWhen turned counterclockwise Surround modes and parameters Surround parameters eListening to the Radio Auto preset memoryPress Tuner to set the input function to Tuner Auto tuningManual tuning Recalling preset stations Preset stationsInitialization of the Microprocessor Last Function MemorySurround Speaker setting examplesAdditional Information Dolby Pro Logic Dolby Digital and Dolby Pro LogicDolby Digital compatible media and playback methods DTS compatible media and playback methods DTS Digital SurroundTroubleshooting Specifications Avant L‘UTILISATION Table DES MatieresAvant de mettre sous tension Ranger ces instructions dans un endroit sûrCaracteristiques Precautions D’INSTALLATIONPrecautions DE Manipulation Panneau avant Nomenclature ET FonctionsSystem SET UP Unité de télécommandeFinalement, configurer le système Ensuite, insérer les piles dans la télécommandeLire EN Premier Réglage DES Systèmes D’ENCEINTEConnexion des composants audio ConnexionsMettre cet appareil sous tension. Dans ce cas, mettre cet Audio. Ne pas les utiliser pour un sèche-cheveux, etcConnexion d’un lecteur de CD Connexion des composants vidéoPrises numériques Digital Connexion d’un jeu vidéoPrise de sortie de moniteur Monitor Connexion d’un téléviseur/tuner DBS Téléviseur/DBSPlatine vidéo Connexion des lecteurs vidéoPrécautions d’utilisation des prises en S Connexion d’un composant vidéo équipé de prises vidéo SRemarque à propos des prises en S Connexion des bornes d’antennes Remarque à l’installateur de système de télédistributionRemarques Ensemble d’antenne-cadre AM Connexion des antennes AMConnexion des bornes d’enceinte Connexions du système d’enceintesCircuit de protection Insertion des piles Utilisation DE LA TélécommandePlage d’utilisation de la télécommande Touche System Setup Installation DU SystemeTouches Cursor , ª, 0 Touche SelectConfiguration des haut-parleurs Avant de configurer le systèmeAppuyer sur la touche System pour accéder aux réglages Touche gaucheParamètres Réglage de la sortie de graves Subwoofer ModePrécaution Utiliser les touches gauche Et droitPréparations Reglage de la temps de retardApres avoir configure le système Configuration de l’entrée numériqueOptique 2 OPT Initial PHONO, Tuner et V. AUX ne peuvent pas être sélectionnésUtilisation des composants audio Denon Unite DE TelecommandeMémoire préréglée Composants audio Pour platine cassette TapeMémoire préréglée Composants vidéo Pour lecteur de vidéodisque VDP Pour lecteur DVDPour platine vidéo VCR Pour moniteur de téléviseurPréparatifs Avant l’utilisationLecture de la source de programme analogique Réglé est sélectionné, tourner le bouton Après le début de la lectureRéglage de la qualité sonore tonalité Désactivation provisoire du son sourdine Ecoute avec casqueMuting Video SelectSur le bouton Input Mode AUTO, PCM, DTS ou Analog Annulation du mode d’ entrée externePour choisir le mode d’entrée souhaîté. Voir Lecture en utilisant les prises d’entrée externe EXT.Avant la lecture utilisant la fonction d’ambiance AmbianceTone Ajuster le niveau de l’enceinte sélectionnéeExemple Mode Dolby Surround Pro LogicRéglage Default Réglage DimensionParamètres d’ambiance q Mode Pro Logic Mode PanoramaSélectionner le mode Dolby/DTS Surround Régler le mode d’entrée à Auto ou DTSGlissière de la télécommande est en Sélectionner la source d’entréeLFE Effet de basse fréquence Paramètres d’ambiance w Cinema EQ. Eqaliseur CinémaCOMP. Compression de gamme dynamique Mémoire personnelle Plus Simulation D’AMBIANCE DSPModes d’ambiance et leurs caractéristiques Touche gauche Touche droit Simulation d’ambiance DSPDefault Y/N Appuyer sur la touche Surround Parameter Lorsqu’il est tourné dans le sens horaireLorsqu’il est tourné dans le sens anti-horaire Paramètres d’ambiance e Room Size Taille de piece Delay Time Temps de retardEfect Level Niveau d’effet Modes d’ambiance et paramètresMémoire préréglée automatique Ecouter DE LA RadioRégler la fonction d’entrée à Tuner Syntonisation automatiqueSyntonisation manuelle Stocker la station dans la mémoire préréglée Stations prérégléeRappel de stations préréglées Initialisation DU Microprocesseur Memoire DE Derniere FonctionRéglage de base Informations SupplementairesAmbiance Méthodes de lecture et média compatibles Dolby Digital Dolby Digital et Dolby Pro LogicMéthodes de lecture et média compatibles DTS Remarque Depistage DES PannesConsommation Dimensions externes maximales Rapport signal/bruitTélécommande RC-897 Piles Dimensions externesVCR List of Preset Codes / Liste DE Codes Préréglés DVDVDP Francias English 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-1802/882 specifications

The Denon AVR-1802 and AVR-882 are notable models in Denon's lineup of audio/video receivers, catering to home theater enthusiasts who demand quality sound and versatility. These receivers, popular in the early 2000s, combine advanced technologies with user-friendly features to deliver an immersive audio experience.

One of the standout features of the Denon AVR-1802 is its high-power output, capable of delivering 80 watts per channel across seven channels. This allows it to effectively drive a full home theater speaker setup, ensuring that every sound, from the subtlest whispers to the most explosive action sequences, is rendered with clarity and depth. The receiver supports both Dolby Digital and DTS decoding, allowing users to enjoy a wide array of movie soundtracks with impressive fidelity.

The AVR-882, while slightly more advanced, shares similar audio capabilities and adds features like multi-room audio support and enhanced connectivity options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players and gaming consoles without the hassle of constantly switching cables. The ability to process high-definition audio formats makes both receivers compatible with modern home theater setups.

In terms of processing power, both models utilize Denon’s proprietary processing technology, which enhances audio clarity and improves the overall listening experience. The inclusion of Advanced AL24 Processing ensures that digital audio is upsampled effectively, maintaining the integrity of sound as it passes through various stages.

Another commendable characteristic is the intuitive user interface and setup process. Denon has designed these receivers with ease of use in mind, featuring an on-screen display that simplifies the navigation of numerous settings. The presence of automatic speaker setup technology, often referred to as EQ calibration, allows users to optimize audio performance based on the unique acoustics of their room.

Connectivity options are robust as well, with numerous analog and digital inputs, including composite, component, and S/PDIF connections for versatile compatibility with older and newer devices, making these receivers suitable for a variety of setups.

Overall, the Denon AVR-1802 and AVR-882 exemplify the blend of power, technology, and convenience that Denon aims to offer, promising both casual listeners and serious audiophiles a quality audio experience that stands the test of time. Their features not only enhance home theater configurations but also ensure vibrant audio playback for music and movies alike, making them valuable additions for anyone looking to elevate their entertainment experience.
Top Page Image Contents