Sunbeam 8300 manual Care and Cleaning

Page 12

Care and Cleaning (continued)

Figure 7

5.Remove the boiler cap completely. See fig 7

6.Place the unit on its side and carefully pour the descaling solution into the boiler. Replace the cap.

7.Return the unit to the upright position and leave for 2 minutes.

8.Shake the unit back and forth to dislodge any scale build up on the base of the boiler. Leave for 10 minutes.

9.Shake the unit again to swirl the solution around inside the boiler.

10.Place the unit on a sink or vessel so that water can be expelled from the boiler flush cap.

11.Carefully remove the boiler cap and allow the descaling solution to empty.

12.Rinse with 1 cup (250ml) clean water, shake and empty. Repeat.

13.Once you have completed the descaling process, and refilled the tank, the Calc Clean reminder will no longer

be illuminated. The power light will

illuminate and the unit will begin heating as normal.

Note: Sunbeam Steam Ironing System descaling tablets are available from selected department stores and electrical retailers.

12

Calc Clean instructions – using lemon juice Alternatively, if you do not have Sunbeam Ironing System Descaling Tablets, you can use lemon juice to remove the scale build up from inside the unit’s boiler.

1.To flush the boiler, turn the unit off and wait for it to cool completely (approx 2 hours).

2.Place the unit on a waterproof surface, or on the edge of the sink.

3.Slowly release the boiler cap to release

any remaining steam. Remove the boiler cap completely

CAUTION: if the unit has been used prior to cleaning the boiler cap will be very hot. Ensure that the unit has cooled completely before commencing the Calc cleaning process.

4.Empty any remaining water from the boiler.

5.In a small jug, add 1tbs lemon juice to 1 cup (250ml) of water and stir to mix.

6.Place the unit on its side and carefully pour the lemon solution into the boiler. Replace the cap.

7.Return the unit to the upright position and leave for 2 minutes.

8.Shake the unit back and forth to dislodge any scale build up on the base of the boiler. Leave for 10 minutes.

9.Shake the unit again to swirl the solution around inside the boiler.

10.Place the unit on a sink or vessel so that solution can be expelled from the boiler flush cap.

11.Carefully remove the boiler cap and allow the solution to empty.

12.Rinse with 1 cup (250ml) clean water, shake and empty. Repeat.

13.Once you have completed the descaling process, and refilled the tank, the Calc Clean reminder will no longer

be illuminated. The power light will illuminate and the unit will begin heating as normal.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Pro Glide 8300 Steam Generator Contents Important instructions retain for future useSunbeam’s Safety Precautions Safety Precautions for Your IronSteam release button Iron restRefillable water tank cover Variable temperature dial Thermostat lightCord Clamp Power On Button Calc Clean IndicatorOn/Off Switch Steam rate ButtonsUsing your Pro Glide 8300 Steam Generator Before first useFilling the steam generator tank with water Using your Pro Glide 8300 Steam Generator Using your ironSafety Auto-Off Refilling the tank during ironingCalc Clean Reminder Care and Cleaning After each useCare and Cleaning Ironing Tips and Tricks Tip # 1 Iron shirts like a proIroning Chart Ironing recommendationYear Replacement Guarantee Need help with your appliance?

8300 specifications

The Sunbeam 8300 is a versatile and innovative kitchen appliance designed to simplify meal preparation while enhancing cooking efficiency. Combining a sleek design with advanced features, this multi-functional device is ideal for both novice cooks and culinary enthusiasts.

One of the standout features of the Sunbeam 8300 is its powerful heating element, which provides rapid temperature control and consistent cooking results. This ensures that foods are cooked evenly, whether you’re sautéing vegetables, searing meats, or simmering sauces. The appliance also boasts a spacious cooking surface, allowing users to prepare large meals or multiple dishes simultaneously.

Equipped with a user-friendly digital display, the Sunbeam 8300 offers intuitive controls that make it easy to select cooking modes, set timers, and adjust temperatures. This digital interface enhances the cooking experience by providing real-time feedback and ensuring precise cooking conditions. Additionally, the device includes pre-programmed settings that cater to various cooking styles, allowing users to create everything from slow-cooked stews to quick stir-fries at the touch of a button.

Safety is a top priority for the Sunbeam 8300. The appliance is constructed with heat-resistant materials and features an automatic shut-off function that activates when the device is not in use for a specific period. This not only prevents overheating but also gives users peace of mind when leaving the device unattended.

The Sunbeam 8300 also incorporates advanced cooking technologies, such as induction heating and steaming functions, which help retain nutrients in food while enhancing flavor. The induction heating system ensures rapid and precise heating, while the steaming function offers a healthier way to prepare meals, preserving essential vitamins and minerals.

Cleaning up after cooking is effortless with the Sunbeam 8300. The appliance features a non-stick surface that prevents food from sticking, making it easy to wipe down after use. Many components are also dishwasher-safe, allowing for hassle-free maintenance.

In conclusion, the Sunbeam 8300 stands out in the kitchen appliance market due to its advanced technologies, versatile cooking options, and user-friendly interface. Whether you’re preparing a weeknight dinner or hosting a special gathering, this appliance guarantees convenience and efficiency, making it a worthy addition to any home kitchen.
Top Page Image Contents