Convection Oven Operating Instructions

509 305936 OpM WVOC-G136

A. MANUAL COOK MODE

1.Set the OVEN POWER SWITCH (C.01) to ON. The OVEN POWER ON INDICATOR (C.03) will glow when the switch is ON.

2.Rotate OVEN TEMPERATURE CONTROL knob (C.07) until the desired cooking temperature is displayed on the READOUT (C.05A). The oven will begin heating, and the temperature digits will flash, until the set temperature is reached.

3.Rotate OVEN TIME CONTROL knob (C.06) until the desired time is displayed on the READOUT. The digits and colon will flash, indicating that time has been set but the timer is not started.

4.Load product in the oven. Press START TIMER key (C.08). The timer digits count down and the colon (only) flashes during the timer period.

5.At the end of the timer period, an audible alarm will sound. Press CANCEL key (C.11) to silence the alarm.

SUGGESTION: For best baking results when making baking soda biscuits, use rack positions 2, 5 & 8 ( where rack position 1 is the top rack). When baking one pan: use rack 5 (center rack); when baking

2 pans: use racks 2 & 8; when baking three pans: use racks 2, 5 & 8.

B. PROGRAM COOK MODE

1.Five (5) programmable keys (C.10) are provided for presetting frequently used time / temperature combinations. To set the program:

a.Press and hold the appropriate PGM key.

b.While holding the PGM key, turn the TIME and TEMP knobs until the desired time and temperature is displayed on the readout.

c.Release the PGM key to store the displayed time and temp in memory.

2.The program for any PGM key can be recalled by momentarily pressing that PGM key.

3.To start a programmed cook cycle, press the appropriate PGM key and the START TIME key. Once the cook cycle has started, the TIME and TEMP knobs are locked out to prevent accidental re-programming.

4.The actual oven temperature may be recalled at any time by pressing the ACTUAL TEMP key (C.09).

5.At the end of the timer period, an audible alarm will sound. Press CANCEL key (C.11) to silence the alarm.

OPERATION (continued)

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

CAUTION:

ELECTRICAL

SHOCK HAZARD DO NOT splash or pour water onto control panel or wiring.

CAUTION:

ELECTRICAL

SHOCK HAZARD

DO NOT operate the unit if the keypad is torn or broken.

C.03 C.04

C.01				C.02

C.05

C.06

C.07

C.08						C.09

C.10

C.11

Fig. 9 Oven Programming Keys

WVOC-G136 specifications

The Wells WVOC-G136 is a highly regarded vapor abatement system specifically designed for the treatment of volatile organic compounds (VOCs) in industrial applications. This technology showcases a series of innovative features and characteristics that make it a top choice for facilities looking to minimize their environmental footprint while ensuring compliance with increasingly stringent regulations.

One of the standout features of the WVOC-G136 is its efficient performance in removing harmful VOCs from emissions. Utilizing advanced adsorption technology, the system effectively captures and retains volatile organic compounds, significantly reducing their presence in exhaust streams. This not only helps organizations meet regulatory requirements but also aids in reducing potential health hazards associated with VOC exposure.

The WVOC-G136 employs a user-friendly design that simplifies the installation and maintenance processes. With modular components, it can be easily integrated into existing systems, offering flexibility and adaptability to various industrial settings. This design minimizes downtime and maintenance costs, making it a cost-effective solution for businesses seeking to enhance their emission control strategies.

In terms of technology, the Wells WVOC-G136 incorporates high-efficiency activated carbon media to maximize absorption rates. This media is designed to have a high surface area, allowing for the effective capture of a wide range of VOCs, including hazardous air pollutants. The system also features an advanced monitoring and control interface, which allows operators to track performance metrics continuously and ensure optimal functioning.

Another notable characteristic of the WVOC-G136 is its eco-friendly design. By reducing VOC emissions, the system contributes positively to air quality and overall environmental sustainability. This makes it ideal for industries such as pharmaceuticals, chemicals, and manufacturing, where VOCs are often prevalent.

Moreover, the WVOC-G136 is built with durability in mind, featuring robust materials and construction that can withstand the rigors of industrial environments. Its reliable operation ensures consistent performance over time, providing peace of mind for facilities focused on compliance and emission reductions.

In summary, the Wells WVOC-G136 is a powerful vapor abatement solution that combines advanced technology with user-friendly features. Its efficient VOC removal capabilities, eco-friendly design, and durable construction make it an ideal choice for industries facing stringent regulatory challenges while striving to protect the environment.