Denon AVR-2803/983 manual Default Setting ZONE2 Volume Level, =L.L. r.L., E

[2] Outputting a program source to an amplifier, etc. in a different room (ZONE2 mode)

	Press the ZONE2 button.	ZONE2		3,5	3
1		_O_		Ught	I
		{Main	unit}

Press the ZONE2/REC button.	ZONE 2
	/REC
The display switches as follows each
time the button is pressed.
	{Malrl	unit)
With "ZONE2 SOURCE" displayed, turn	w	_lor_
source you wish to output.
• The indicator of the selected source
the FUNCTION knob and select the _1_O_
light.
	{Maill	unit}

Start• Forplayingoperatingthe sourceinstructions,to be outputrefer . to the manuals of the respective components.

To cancel, turn the function knob and select "SOURCE".

(Mai_ unit}

2 1

Display2

"=:_='='=i, H'=".'='_	='="='='=iH'='=='='.... .i
=::..L._i "i E:..=::.	.:::=L._L._r_:.L., E:.

NOTES:

•The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDRfFAPE recording output jacks.

•Digital signals are not output from the ZONE2 audio output jacks.

[3] Remote control unit operations during multi-source playback (selecting the input source)

This operation is possible when ZONE2 mode is selected.

This operation is not possible in the REC OUT mode.

The main zone output can be turned on and off with the

button.

Select "ZONE2" using the ZONE 2

Press the ZONE2 "ON" button.

TO cancel the ZONE2 mode. Press the ZONE2 "OFF" button.

Press the input source button

•The ZONE2 source switches directly.

1

_.2

(Remote colltro_ urllt)

OFF ZONe2DN

,_

{Remote contro_ urfit)

"MAIN ON/OFF" button.

5 56

5

AThe output level of the ZONE 2 OUT terminals can be controlled using the VOLUME + and buttons on the remote

control unit.

The output level of ZONE 2 OUT can be controlled only if ZONE2 voL level is set "Variable" at Zone2 Control in System Setup Menu. (See page 26)

+tZ)

@_._.

{Remote corEro_ unit)

4

When the ZONE2 SOURCE function is 0BL set to TUNER, the preset channel can

be selected using the CHANNEL + and - buttons on the remote control unit.

-_ DEFAULT SETTING (ZONE2 VOLUME LEVEL) :

-- - dB (MINIMUM)

{Remote control unit)

47